?衍纸普及编:(跟着下面做，任何人都可以做出作品.)
Yan universal paper compiled :( do follow below， anyone can make work.)
1.现在先来制作花瓣，首先取出一个纸条，然后用卷笔卷成一个紧卷。在制作的时候，将纸条的一端先卡在卷笔卡槽里面，这样在制作紧卷的过程中更加的轻松。
2.将卷好的紧卷小心的从卷笔上面取下来，并且置入到万用尺的圆型模子中。选择的圆形模子直径在1.5-2cm。然后捏着紧卷的手放开，这个卷就会按照圆形模子的大小自然松开。在用牙签卷纸的过程中，不要用手捏持时间过长，这样会导致卷本身无法自然松展开。
1. Now the first to make the petals， take out a piece of paper first， then rolled into a tight coil volume pen. In the production of the time， one end of the strip in the volume of the first card slot inside the pen， so more easily in the process of making tight volume.
2. Place the roll tightly rolled carefully removed from the volume above the pen down， and placed into a round mold of universal ruler. Round selection in the mold diameter 1.5-2cm. Then holds hands off tight volume， this volume will be in accordance with the size of the circular nature of the mold release. Roll with a toothpick in the process， do not Yongshou Nie hold for too long， this will cause the volume itself unable to expand natural pine.
3.用白胶将纸卷的边缘粘贴住，并且等待其干燥。
4.接着用手将纸卷的一端轻轻捏扁。这个时候你就得到了衍纸的一个基本的单元模型，泪滴卷。这里面有20个基本的单元模型，他们的制作无非就两个操作：卷和捏。
3. Use white glue to the edge of the paste roll to live， and wait for it to dry.
4. Connect one end of the roll and then hand gently pinch flat. This time you get a basic unit model derived paper， tears roll. There are 20 basic unit model， making them nothing more than two operations: the volume and kneading.
5.以同样的方式制作5个泪滴卷用作花朵剩下的花瓣。一个基本的衍纸模型就制作完成了
6.现在接下来开始制作树叶。重复第1步到第4步。然后用手压捏纸卷的两端。这个时候制作的基本单元叫做"眼形卷”。、
5. In the same manner as the production of five teardrop volume as the rest of the flower petals. A basic model is produced derivative of the paper
6. Now the next start making leaves. Repeat steps 1 through 4. Then kneaded by hand pressure at both ends of the roll. The basic unit of production this time is called "eye-shaped roll."
7.最后我们制作另一种变形的叶片。根据这种叶片的形状，我们称之为"叶形卷”。在制作这个基本模型时，可以首先制作出一个眼形卷，然后将两端向两个相对的方向捏压，就可以形成"叶形卷”。
8.现在来制作衍纸花的花蕊：这个就非常简单了，就是先制作一个纸卷，然后让其在圆形模子中松展开（直径大约1cm），这个就叫做"松卷”。
7.最后我们制作另一种变形的叶片。根据这种叶片的形状，我们称之为"叶形卷”。在制作这个基本模型时，可以首先制作出一个眼形卷，然后将两端向两个相对的方向捏压，就可以形成"叶形卷”。
8.现在来制作衍纸花的花蕊：这个就非常简单了，就是先制作一个纸卷，然后让其在圆形模子中松展开（直径大约1cm），这个就叫做"松卷”。
7. Finally， we make another variation of the blade. According to the shape of the blade， which we call "leaf roll." In the production of this basic model， we can create a first eye-shaped volume， and then pinch the ends pressed against two opposite directions， it is possible to form a "leaf roll."
8. Now Yan paper flowers to make flower: This is very simple， is the first production of a roll， and then allowed to expand in a circular mold pine (diameter of about 1cm)， this is called "unwinding."
9.然后按照前面的图形，将这些制作好的衍纸单元进行组合，底部用白胶小心翼翼的粘贴到底板上面。这样制作就完成啦！
10另外一种变形的衍纸花
9. Then follow the previous pattern， these make a good paper unit derived by combining the bottom with white glue carefully pasted in the end plate above. Such production is complete it!
10 Another distortion derivative paper flowers
?
