This NP-F series battery plate with dummy battery is compatible for Canon LP-E8 DC battery for Canon EOS 550D 600D 650D 700D & Rebel T2i T3i T4i T5i cameras.

Features:
This battery plate system with dummy battery is used to supply power for Canon EOS 550D/600D/650D/700D & Rebel T2i/T3i/T4i/T5i cameras.
The battery plate is compatible for Sony NP-F970/960/750/770/550/570 series batteries.
The output voltage is 7.2V.
With a 5.5/2.1mm(outside/inside diameter)socket, the plate also supports voltageinput when the battery is run down.
A 1/4" screw on the bottom of the plate, you can attach the plate to your devices with 1/4" screw hole.
A hot shoe adapter with 1/4" screw, for mounting the plate on your camera or other devices with hot shoe.
With low battery indicator, when the light turns from green to red, it means you need to replace the plate battery.

Specifications:
Material: Plastic
Output Voltage:7.2V
Cable Length: Approx. 54cm / 21.3in
Item Size: 9.5 * 4.5 * 2 / 3.7 * 1.8 * 0.8in
Item Weight: 120g / 4.2oz
Package Size: 15 * 12.5 * 3cm / 5.9 * 4.9 * 1.2in
Package Weight: 131g / 4.6oz

Note:
When the battery plate is under voltage input, please make sure that the input voltage must be lower than 8V in order not to burn out the camera.

Package List:
1 * Battery Plate
1 * Dummy Battery
1 * Hot Shoe Adapter
1 * 1/4" Screw