Size: Total Length 16CM * Width 4CM

Features:

1. Using high brightness LED， energy saving， long life;
2. When driving， soft lighting， braking， bright lights;
3. Avoid rainy rear-end， as a safety warning lights plays the best performance;
4. innovative designs， lighting decoration correct;
5. reasonable structure， easy installation， the original car first wife.

Installation:

The product can be installed in any suitable location can be mounted to the rear brake assist， lane side can replace the side lights， front-loading can be done showing the wide lights， bull bar， side noble silver plating is good and the product is paste-type Since the pasted different positions require drilling threading (care of friends， please do not shoot)， paste glue effect is very good， not fall， and ease of use.

Location selected installation， drilling threading， pasted on OK
Product has three leads;
Then the power + 12V;
Pick brakes + 12V;
Connect the power supply (Ground).

Light function to ensure traffic safety; new spacecraft design， fashionable

[Installation Tips]

1. Products paste， paste products before the product must be installed on the site required to adjust，

Determine the location of product installation， and then tore off the red film paste. Operation should avoid contact with the plastic surface of the finger，

Must use the product after pasting beat， in order to ensure full access to plastic surface and wetting.
2. Products and Parts paste does not touch the water， and larger dust within the required 24 hours before they achieve the best adhesion
  Note:

  Be sure to clean the need to paste the prior section，

   And kept dry， tear-sided tape behind the product， squeeze fixed，

   Do not wash or wet water two days after installation