Power Conditioning 100W 12VDCin 230VAC Power Inverter
Specifications
Input/Output Type describes the type of the input and output voltage.
Typical Output Voltage describes the typical output voltage that can be delivered to the load .
AC Output Voltage Regulation describes the rate of regulation of the ac output voltage to reach near a constant voltage values .
Surge Output Power describes the power to handle instantaneous overload of a few seconds to provide the higher power required to start certain type of devices .
Output Wave Form describes the output Wave Form shape from the device .It maybe Square Wave, Modified sine wave, Pure sine wave .
Output Frequency describes the frequency of an the output AC signal tells you how many full cycles of an AC waveform are generated in 1 second. It is expressed as a number of cycles per second .
Typical Input Voltage describes the typical needed input voltage to operate the device .
Input Voltage Range describes the range of the operating Input Voltage at which the device operate without any problem.
Input Current describes the input dc current which can be safety applied to operate the device .
Efficiency describes the ratio of the output power to the input power .
Input Connection Type describes the type of connector that connect to the input of the device.
Output Connection Type Describes the type or gender of contacts in output connector.
Input Cord Length describes the length of the cord which is connected to the input of the device .
Remote Control Capability describes if the output connection of the device can be controlled remotely to be switched on and off or not .
Protection describes the type of the protection for the device such as Input Overvoltage, Input Low Voltage, Overload, Over Temperature, Short Circuit, Low Battery Alarm .
Minimum Operating Temperature describes the minimum temperature that the device can function correctly while working.
Maximum Operating Temperature describes the maximum temperature that the device can function correctly while working.
Packaging describes the method of containing/packaging a product for delivery or sales.
Product Weight describes the mass or weight of the product.
Component Diameter, for cylindrical package
Component mounting or installing type