Color	Black	
<br />Model	FT-16	
<br />Material	ABS	
<br />Quantity	1 Piece	
<br />Compatible Brand	Universal	
<br />Compatible Models	Universal	
<br />Effective Distance	50 m	
<br />Wired/Wireless	Wireless	
<br />Receiver	1 Piece	
<br />Channel	16	
<br />Sync Time	1/250 s	
<br />Working Frequency	433MHz	
<br />Working Voltage   	3 V	
<br />Battery Model	AA	
<br />Battery included or not	No	
<br />Remote Controller Battery Number	2	
<br />Certification	CE	
<br />Other Features	Screen Type: LCD; Screen Size: 0.8 inch	
<br />Packing List	1 x FT-16 Transmitter
<br />1 x FTR-16 Receiver	
<br />
<br />
<br />This flash trigger supports flash grouping and remote flash power control; With sensitive reactions and stable signal transmission, it applies to flashes with the wireless control port, such as, Godox Wistro AD-180 &amp; AD-360, Godox QT series and Gemini GT &amp; GS series studio flashes, as well as specific camera flashes. It is also compatible with Godox Cells series transceiver.
<br />
<br />Features:
<br />
<br />Power, wireless control flash 16 packets
<br />
<br />Remote control lamp and focus lamp, and a buzzer switch
<br />
<br />Wireless synchronous flash
<br />
<br />Large area of liquid crystal display, clear and easy to understand
<br />
<br />Receiver mini light, flash power supply, without battery
<br />
<br />50 meters above the maximum sync speed regulation range, 1/250 seconds
<br />
<br />Supports two types of power display mode (5.0~10.0 or 1/1~1/128)
<br />
<br />Easy to install and use the camera control in hot shoe on demand
<br />
<br />Wireless adjusting flash settings:
<br />
<br />The trigger set can wireless adjust the following settings: the flash power ratio, the on-or-off of the buzzer and the modeling lamp or the AF-assist beam, as well as the power-ratio display mode.
<br />
<br />On the transmitter and the receiver, set the channel select switch to the same position and the Power Control Group Select Dial to the same grade.
<br />
<br />Insert the receiver into the Wireless Control Port of the flash unit. Then power the flash on.
<br />
<br />Adjust the flash settings on your transmitter.
<br />
<br />Wireless triggering the flash:
<br />
<br />On the transmitter and the receiver, set the Channel Select Switch to the same position.
<br />
<br />Insert the receiver into the Wireless Control Port of the flash unit. Then power the flash on.
<br />
<br />Press the Test Button to fire a flash. Alternatively, you can set the transmitter onto the camera&#39;s hot shoe and press the camera&#39;s shutter-release button to fire a flash.
<br />
<br />Support flash:
<br />
<br />Witstro series flashes, QT series flashes, Gemini GT &amp; GS series studio flashes, DE series flashes, DP series flashes.
<br />
<br />Support camera:
<br />
<br />Canon, Nikon, Pentax, Olympus...
<br />
<br />                                                    
<br />                                                                            Dimensions: 3.86 in x 1.97 in x 1.46 in (9.8 cm x 5.0 cm x 3.7 cm)
<br />Weight: 2.82 oz (80 g)
<br />
<br />                        
<br />                                            
<br />                
<br />