NEMO Submersible Cordless Drill ( NEMO Diver V2 50M )

12

Nemo Drill - high power diving drill

lionRPMCHUCK-SIZEILLUMINATIONWARRANTY

Technical specs:
Battery: 2.9kg (6.39 pounds)
No Load Speed (2 speeds) 0-400 / 0-1500 RPM
Maximum Torque: 39N/m
Chuck size: 13mm
Net weight (with battery): 2.9kg (6.39 pounds)
Capacity (steel): 10mm
Capacity (wood): 25mm
Submersible up to: 50m (164 ft)


The Nemo V2 DIVERS Edition (DDV2-18-3Li-50) offers commercial, research, and recreational divers a salt-water ready tool for a variety of tasks, such as tagging coral reefs for research and cleaning barnacles off of boats and yachts. The Nemo V2 DIVERS Edition has a maximum operating depth of 50m (164ft). This drill boasts a salt-water resistant black and red paint job and comes with a durable carrying case, a battery charger, a pressure valve and a Nemo pump to pressurize the drill, and two 18V 3Ah Lithium Ion batteries.

NEMO Submersible Cordless Drill ( NEMO Pool&Spa V2 5M )

12
lionRPMCHUCK-SIZEILLUMINATIONWARRANTY

Technical specs:
Battery: 18 V Li-ion 3Ah
No Load Speed (2 speeds) 0-400 / 0-1500 RPM
Maximum Torque: 39N/m
Chuck size: 13mm
Net weight (with battery): 2.9kg (6.39 pounds)
Capacity (steel): 10mm
Capacity (wood): 25mm
Submersible up to: 5m (16.4 ft)

The Nemo V2 POOL & SPA (PSV2-18-3Li-5) is a cutting-edge solution for pool and spa industry professionals looking to work more quickly and efficiently. Whether you’re  replacing a main drain or installing a pool liner, with the Nemo V2 POOL & SPA, there’s no need to drain the pool or waste valuable time using a manual screwdriver. The Nemo V2 POOL & SPA is already saving hundreds of pool professionals time and money.

This model has a maximum operating depth of 5m (16ft) and is intended for work in fresh or chlorinated water only. This drill has an eye-pleasing blue and black design and comes with a durable carrying case, battery charger, and two 18V 3Ah Lithium Ion battery.

==============================================================

FAQ :

What types of jobs can you do with Nemo drills?
The sky (or the sea) is the limit, but here are just a few of the jobs professionals do using our drills:

  • Pool and spa: Replacing main drains, installing pool liners, and working on any underwater components such as ladders and lights
  • Research diving: Drilling holes in coral or rocky sea bottoms for research purposes
  • Commercial diving: Any type of underwater construction requiring a tough yet lightweight tool
  • Boating and yachting: Repairing and doing maintenance (such as hull cleaning) on boats and ships without the hassle and cost of dry-docking
  • Aquaculture: Repairing and installing underwater aquaculture equipment
  • Plumbing, sewer, and construction: Tightening or removing screws underwater or in wet conditions and working in the rain or in muddy conditions.
  • Municipal workers and water services: Repairing water mains, fountains, water tanks, and more
  • Oil, gas, and mining: Drilling in hazardous locations that require a self-contained and sealed piece of equipment

Does the drill work ONLY underwater?
You can use your Nemo drill above water, under the water, and in any wet conditions.

Are there any special instructions for using the drill underwater?
In order to protect your Nemo drill for the long term and increase its lifespan, air pressure should always be added to the drill, via the valve on the back, for all underwater work (as opposed to above-water wet conditions). Specific instructions are provided in the Nemo drill instruction manual.

Do any special precautions have to be taken when working outside/above the water?
The Nemo drill can be used on dry land like any ordinary drill/driver. Like any power tool, you should monitor the tool during use for signs of overload or overheating, and take a short break, in the event of such a situation.

Can the Nemo drill be used in salt water?
All Nemo drill models, with the exception of the Nemo POOL & SPA, may be used in salt water (the POOL & SPA may only be used in fresh or chlorinated water). We recommend rinsing our Nemo drill with fresh water after using it in salt water.

How long does a fully charged battery last?
Our Nemo 18V 3Ah Li-ion Battery lasts between 1-3 hours, depending on the intensity of the work and the type of job being performed with the drill. Our 6Ah Li-ion Battery lasts between 2-6 hours, with the same conditions.

My drill is only rotating one way – what’s the problem?
On Nemo drills, there is an option to place the rotational direction switch in the middle. This neutral position operates only the LED light, without any rotation of the drill. To choose a rotational direction, firmly press the rotational direction switch in the desired direction.



Example Of How the case looks like :
12