Item Descriptions:

size:

90CM × 200CM

NO.010 White cloudy type Blindfold · 95% opaque · white · no rubber · UV cut · insulation

Blindfold

With an opacity of 95%, blindfold effect is good, it becomes invisible from the outside, and the privacy can be protected properly.

We often use it in various places such as bathroom / office / bedroom etc.

Bright / Translucent

In the elegant white fabric, after the glass film is pasted, since light comes in, the interior is bright and does not feel dark.

For details, please refer to the picture of blindfold effect test.

No rubber

Adhesive is unnecessary and it sticks to glass with the force of static electricity.

The operation is very easy and you can fix it again if you fail.

Since a special poster label is attached to the transparent protective sheet, posting of the protective sheet becomes easy.

UV cutting, heat insulation, warmth

It can block harmful ultraviolet rays by 99% and is furniture friendly item.

Also, using a special material with high thermal insulation effect, the air layer (about 4 mm) of the seat will block the outside air and will improve the cold / heating efficiency.

Usage range

General household windows, glass pouches, glass sliding doors etc. Shower room, glass solar room, also very suitable for companies, stores, offices, conference rooms and French windows, desk segments.

And, since the corresponding film can only be used for glass, please do not hesitate.

Apply to smooth surface, do not paste on rough or irregular glass.

It is irrelevant whether it is a pair glass (double glass) or a glass with a mesh or structure, and if the surface is flat (slippery), it can be attached cleanly.

We sell both scrub type and white cloudy type.

Kusu Love Type:

Since the transmittance is 90%, you can see shadows of objects.

White cloudy type:

White, the transmittance is 95%, the blindfold effect is better than the scrub.

Usage of window film:

1, Measure the size of the glass and cut the film.

2CM is held as an extra at the time of cutting, it is for future adjustment.

2, Peel off the protective film attached to the film.

3, Use a non-fluffy cloth to clean the glass.

4, wet the whole with a bubbling glass containing soap bubbles.

5, Remove air bubbles, water, etc. from the middle using credit cards and 尺.

6, Cut the excess part with the knife.

Notes

1, In the winter cold season, the film may become stiff when it is rolled up, and if you paste it, it may rise.

Please solve the problem by warming the film with a hair dryer before applying.

Or soak in hot water for a while. Paste it softens.

After that, even if it gets cold and solid, it will not rise.

2, Although it is recommended to paste in a size somewhat larger than the size of the glass and then cut off the remaining part with a cutter knife at the end

3, apply to smooth surface, do not paste on rough or uneven glass.

It is irrelevant whether it is a pair glass (double glass) or a glass with a mesh or structure, and if the surface is flat (slippery), it can be attached cleanly.

4, Be careful not to attach dust and fibers to the glass before pasting.

5, The surface to be stuck on the window is the surface from which the protective film has been peeled off (the surface slurping).

6, Please stick to the interior side.

7, Please peel off the protective film attached to the back of the film.

In case

8, When wetting with plenty of water, remove all of the air bubbles is a point that you can easily reuse.

(First of all, lightly spray the water on the film surface.This makes the squeegee easy to move.It is also important for scratch prevention.The basic is from top to bottom, from the center to the outside,

Crimp the film with squeegee and extrude the water in. Pull out the water with the kitchen paper so that the removed water will not return inside the film.

Safety guarantee: If there is something about the product please do not hesitate to contact us.

I will correspond firmly.

Features:

• 【Blindfold / Bright】 With an opacity of 95%, blindfold effect is good, disappears from the outside, protecting the privacy and being translucent, you can keep the interior bright as it is.
• 【Picking the window glue stick and peeling】 The pasting is very easy and can be sticked neatly if there is water, since there is no adhesive material on the film, the rest is not on the glass.
• 【Thermal insulation · Temperature control】 Use special materials with high thermal insulation effect, the air layer (about 4 mm) of the seat shuts off the outside air, in the winter it prevents indoor heat from escaping from the window in the winter, hot summer heat
• It can reduce inflow into the room and contribute to electricity saving.
• [Ultraviolet cut film] It can prevent 96% of harmful ultraviolet rays, it reduces sunshade and is a furniture friendly item.
• 【DIY · Size Adjustable】 With a plain white design, a gentle atmosphere drifts, making your home and office more elegant at a lower cost.
• Also, since cutting and combination are also possible, it is easy to match with glass of any size.

Product information:

Shipping Weight: 789 g

Package Dimensions: 5.31 x 5.31 x 91.21 cm