The ArduPilot Mega 2.6 allows the user to turn any fixed， rotary wing or multirotor vehicle (especially multicopters and rovers) into a fully autonomous vehicle;capable of performing programmed GPS missions with waypoints.
 
Features:
For Arduino and For ArduPilot Mega 2.5 Compatible!
Includes both right angle and straight pins for I/O， allowing user to customize as needed.
Onboard 4 MP Dataflash chip for automatic datalogging
Invensense\'s 6 DoF Accelerometer/Gyro MPU-6000.
Atmel\'s ATMEGA2560-16AU and ATMEGA32U-2 chips for processing and usb functions respectively.
Barometric pressure sensor upgraded to MS5611-01BA03， from measurement specialties
Weight: 38g
Size(L*W*H): 70*44*13 mm
 
Note1: The Power Module is only designed to power APM， a RC receiver and APM accessories (GPS， Telemetry radio). It is not designed to power servos. Use your aircraft\'s own ESC/BEC for that.
 
Note2:
the use of electric power transfer: the need to JP1 jumper plug， power supply voltage does not exceed 5.6V， not less than five 
using UEBC: The UEBC power output cable plugged into the receiver INPUTS port， power supply is not higher than 5.2 is not lower than 4.8V 
 
Package Content:
1 x APM 2.6 Flight Controller Board
4 x Dupont Cable

 

aeProduct.getSubject()aeProduct.getSubject()aeProduct.getSubject()aeProduct.getSubject()aeProduct.getSubject()

';