Item Descriptions:

size:

CR 6001

Launch Creader 6001

Launch CReader 6001 provides full OBDII / EOBD diagnostic functions and supports ISO protocols such as ISO 9141-2, ISO 14230-4, SAEJ 1850, and ISO 15765-4.

Code reader features color LCD display, graphical data stream, internet upgrade.

If you have any questions, please do not hesitate to contact us.

LAUNCH CReader 6001 OBDII / EOBD scanning tool

1. OBD II / EOBD full function

Read dynamic data stream

Query Freeze Frame Data

Read current / pending DTCs

Clear DTC

Turn off fault indication light (MIL) / Check engine light

O2 sensor test

Read I / M preparation status

Onboard Monitor Test

Onboard system or component control

Read vehicle information

Read permanent DTCs

2. Color and graphic display of the data stream

3. Free Firmware Update over the Internet

4. Multilingual support (English, French, Spanish, German, Russian, Portuguese, Japanese)

5. Data recording and playback

6. Print data via PC

Lifetime free online update

Upgrade procedure

1. Connect the device to the computer with a USB cable and check the following points.

Within 5 seconds of turning on the device, press the OK key to enter USB mode (this is the focal point for successfully updating the tool).

2. Access the Launch official site, download the update tool, and install it on the computer.

3. Open the update tool, enter "Product serial number" on the back of the device, and click "Upgrade Device".

4. Enter your e-mail address and "Registration Code" and click "Submit".

If you are asked to enter "password", "password" is also "registration code".

"Registration code" is displayed when the scanner starts up.

You can also search from "Help"> "Tool information" ">" Registration code "menu.

5. When entering the "Download Center" interface, select "CR6001 Firmware" and "OBDPROEN" and click "Upgrade" to start the download.

6. When all the steps are completed, reboot the scanning tool and then turn on the tool.

7. The registration process is complete and your tools will be ready for use.

Extensive vehicle

coverage

This code scanner works with most OBD II compliant vehicles manufactured since 1996.

Make sure your vehicle has a voltage of 12V and the diagnostic code reader has a standard 16-pin OBDII connector to connect with the vehicle's on-board computer.

The DLC (diagnostic link connector) is usually located 12 inches below or around the driver 's seat of most vehicles from the center of the steering wheel.

It supports protocols ISO9141, ISO 14230-4, SAEJ 1850, and ISO 15765-4.

Turn off the check engine light

By clicking the "read DTC" button, you can read the diagnostic trouble code that may light up the diagnostic engine lamp, and you can access the explanation of the code.

You can refer to it and repair the problem yourself or you can decide if you need to go to the garage for advanced help.

Please help to turn off the check engine lights.

It will help save money and time!

Quick access with hot key

This basic obd2 scanner features a careful design: 2.8 "TFT all in one color LCD screen and easy to use hot key.

Multiple diagnostic functions such as Freeze Frame, O2 Sensor Test, Onboard Monitoring, Evap System Detection etc. are also ideal tools for DIYer and professional engineers.

Features:

• Smart OBD II Scanner: Launch CReader 6001 provides full OBD II / EOBD diagnostic functions and reads common protocols such as ISO 9141-2, ISO 14230-4, SAEJ 1850, and ISO 15765-4.
• It applies to all OBD II compliant vehicles (1996 ~ present) manufactured since 1996.
• Required functions: color LCD display; display freeze frame data.
• Display graphical and numeric data streams.
• Sensor test.
• System test of the monitor.
• Ideal design: With the all-in-one screen and an easy-to-use hot key, this obd 2 scanner Creader 6001 is an ideal tool for DIYer and professional technicians.
• Powerful function: Full OBDII / EOBD diagnostic function - Read & clear DTCs, query freeze frame data, reading dynamic data stream, reading vehicle information, O2 sensor test, onboard system component control, pending DTC
• Reading, permanent DTC reading, ready state reading, failure indicator light (MIL) off, etc.
• Quality assurance: complete manufacturer's warranty and guarantee of satisfaction.
• The tool firmware can be updated via the Internet.
• Launch is the brand of major diagnostic tool.

Product information:

Shipping Weight: 458 g

Package Dimensions: 4.39 x 19.81 x 29.69 cm