1. Introduction

The HDMI 4x4 matrix switcher features four HDMI inputs and four HDMI outputs. It provides true matrix routing for HDMI signals. It supports the transmission of video (resolutions up to 2160p@60Hz Ultra HD 4:4:4) and supports high resolution digital audio formats such as LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio. It works with Blue-Ray players, Set-Top boxes, Home Theater PCs, and game consoles. Any source is accessible at all times by any display by selecting it via the supplied IR Remote Control, RS-232, TCP/IP or the selection buttons on the front panel. This device supports all HDMI 3D formats. Manages TMDS re-clocking / signal re-generation, HDCP authentication to source & display, and EDID Control handshake"

2. Features

• HDMI2.0, HDCP2.2/HDCP1.4 compliant
• Support video format up to 4k2k@60Hz with 24bit RGB/YCbCr 4:4:4/YCbCr 4:2:2, and up to 4k2k@60Hz with 12bit YCBCR 4:2:0
• Support color space conversions among RGB, YCbCr4:4:4, YCbCr4:2:2 and xvYCC video formats
• Support all HDMI 3D formats up to 2160p@30
• Support high resolution VESA mode video format up to QSXGA@60Hz
• Support reception of any audio data conforming to the HDMI specification such PCM at up to 192kHz, compressed audio (IEC 61937), DSD, DST, DTS and HBR
  
  
  

3. Specifications

- Video Bandwidth 594MHz [18Gbps]

- Support Video Resolution 480i, 576i, 480p, 576p, 720p, 1080i,1080p24/30/50/60, 2160p24/25/30/50/60;

- Input Ports 4×HDMI, 1×IR Receiver, 1×RS-232, 1xRJ-45(Control)

- Output Ports 4×HDMI, 4×Toslink, 4×L/R

- HDMI connector Type A 19 pin female

- RJ-45 connector WE/SS 8P8C

- 3.5mm connector IR Receiver

- ESD Protection Human-body Model: ± 8kV (Air-gap discharge) ± 4kV (Contact discharge)

- Power Supply 12V/2.5A DC (US/EU standards, CE/FCC/UL certified)

- Dimensions 440 mm (W)×200 mm (D)×45 mm (H)

- Weight 1820 g

- Chassis Material Metal

- Silkscreen Color Black

- Operating Temperature 0 ºC~40 ºC/32 ºF~104 ºF

- Storage Temperature −20 ºC~60 ºC/−4 ºF~140 ºF

- Relative Humidity 20~90 % RH (non-condensing)

- Power Consumption 30 W(max)/0.5w(Standby)

- Support simultaneous HDMI Coax and L/R audio outputs

- Support smart EDID management

- Support RS-232, remote control, on-panel control and TCP/IP Control