Item Descriptions:

size:

Apple Watch 42 mm Film Three Set

| Color:

clear

【Do not interfere with kind design & case & difficult to float corners and edges】

Due to its inherent elasticity and flexibility, when a soft film of the same dimensions as the liquid crystal panel is pasted, since the corners and edges of the film are easy to float, we have a film with an edge portion width of about 1.5 mm from the liquid crystal screen

I'm using.

Such a film is compatible with the cover, there is no unnaturalness in which the case protrudes.

And the corners and edges are also less likely to float.

【Thin and handy】

Since there is a curved part on the liquid crystal screen of apple watch, TPU film with elasticity and flexibility can be stuck firmly to the liquid crystal screen.

TPU film is so thin that you can increase transparency and keep the original beauty of the LCD screen as it is.

Thinness is characteristic of TPU film.

Please be anxious!

♪ To protect the film properly, ① label and ② label are attached to the main body film.

Depending on the person, it may be difficult to paste, but if you work slowly when pasting it is okay.

Please work with confidence!

If you have any questions about the work, please do not hesitate to email us!

【Role of liquid sponge & water sticking

♪ Liquid sponge is environmentally friendly and adopts new materials, so there is no bad influence on liquid crystal screen or person.

Please do not worry.

♪ By liquid sponge, you can stick the film neatly.

Please apply the liquid to the sticky side of the film!

Also, please paint a lot of liquid on the sticky side of the film until you slide freely on the LCD screen!

Small bubbles may remain after pasting, but please do not worry as bubbles disappear naturally around 24 - 72 hours after application!

【Package Contents】

Apple Watch 42 mm film * 3, pasting set * 2, instruction manual * 1, warranty card * 1

High transmittance & smooth touch

It suppresses unpleasant glare by matte processing.

The flicker of the screen was suppressed to the limit.

Also, because it is of the gloss type, you can experience high transparency and beautiful screen reflection.

When reading a newspaper, you can concentrate on browsing without feeling uncomfortable.

Depending on the quality of the TPU material, it becomes soft and thin.

It makes the touch operation smooth, so operability is high.

It is comfortable to use, familiar to hands.

【Good quality TPU】

♪ Because of the inherent elasticity and flexibility, even with the usual PET film it is possible to protect even a range that could not be stuck firmly.

You can keep the original beauty of the LCD screen as it is.

Even when viewed from any angle, it is beautiful and looks like a work of art.

There is a sense of unity, so you will not destroy the design of the smartphone.

[Bubble prevention]

& 【Automatic restoration】

Since this product has properties different from ordinary films, small air bubbles may remain after pasting, but please do not worry as air bubbles disappear naturally around 24 hours after pasting!

Also, please do not push small bubbles with a blow card.

It may cause damage to the film.

During the operation, if the film gets scratched slightly, it can be repaired automatically after a while.

If garbage gum or fingerprints are attached to the film, you can wipe cleanly with an Arkor sheet and then paste it again.

【Special anti-fouling coat】

With domestic fingerprint prevention technology and special surface processing, with smooth finger slip, fingerprints and dirt are hard to adhere, and screen stickiness is suppressed.

Even dirt can be easily wiped off.

The severity for me is to make quality goods.

Features:

• Please enter model number Confirm this is compatible:
• [Film features] ♪ To protect the film properly, ① label and ② label are attached to the main body film.
• Depending on the person, it may be difficult to paste, but if you work slowly when pasting it is okay.
• Please work with confidence!
• If you have any questions about the work, please do not hesitate to email us!
• ♪ It is thin and can increase transparency and keep the original beauty of the LCD screen as it is.
• 【New sticking method & water sticking】 ♪ Liquid sponge is environmentally friendly and adopts the latest material, so there is no bad influence on the liquid crystal screen or the person at all.
• ♪ By liquid sponge, you can stick the film neatly.
• You can use it without worrying about it.
• 【Does not interfere with kind design & case & & corners and edges are hard to float >> With special elasticity and flexibility, if soft film with the same dimensions as the liquid crystal panel is pasted, the edges of the film become easy to float,
• We use a film whose edge part has a slightly shorter width than the liquid crystal screen.
• Such a film is compatible with the cover, there is no unnaturalness in which the case protrudes.
• And the corners and edges are also less likely to float.
• 【Applicable models】 Apple Watch 42mm series 3/2 【Material】 TPU LCD Protective Film 【Package Content】 Apple Watch 42mm Film * 3, Paste Set * 2, Instructions * 1, Warranty Card * 1 【With Warranty】 Better Experience
• Please contact us at e - mail if a problem occurs in the product from the date of purchase.
• In some cases, you can get a new one for free.
• 【Precautions for use】 ① Please also read the instruction manual and explanation movie before using the product!
• ② Because this product is different from ordinary film in nature, small air bubbles may remain after pasting, but since air bubbles will naturally disappear after about 24-72 hours after pasting, small bubbles are forcibly extruded with a blow card
• Please do not.
• It may cause damage to the film.
• ③ [Do not interfere with the case] Even if there is no interference in the case, when wishing to install the case, please wear the case in about 24 hours after pasting!

Product information:

Shipping Weight: 81 g

Package Dimensions: 1.29 x 13.00 x 21.41 cm