Instructions for Installing the Replacement LCD Touch Screen of iPhone:
Things You´ll Need:SIM removal tool, Phillips screwdriver, Pry stick,iPhone 4/4S LCD touch screen digitizer

1. Turn off your iPhone, insert one end of the SIM removal tool into the small hole at the right side of the iPhone. Push the end of the removal tool into the hole until the SIM tray pops out a little from the lid. Pull the SIM tray out and set it aside.

2. Then use the Phillips screwdriver to remove the two screws surrounding the dock connector on the bottom of the iPhone.Flip the device over so it is face down on your work surface.

3.It is easy enough to push away the back cover after remove the screws.Pleasepush away the back coverupward.Then,we will remove the battery.

4. Next, we will remove the EMI electromagnetic shielding case.There are densecomponents after removing the 4 fixed screws.

5.We would still remove the other EMI electromagnetic shielding case located in the middle of phone and the inner flex cable. All of these need to pry upcarefully with the special designed tool. Please pry up the flex cable in the iPhone4/4S.

6. There is a small part fixed with screws on the upper right corner・it¨s vibration motor of iPhone.

7. We should remove screws and cables before dismounting the mainboard, and take down other iPhone¨s parts, such as camera, loudspeaker and so on. Pry up the connective parts on the iPhone4/4S and take down the camera.

8. Remove the larger module on the bottom and it´s a loudspeaker module.

9. Then take down the mainboard of iPhone 4/4S.

10. This is a second microphone and VGA camera.

11. Then we could pry up the front panel.

12. Now you can replace the new LCD touch screen,repeat this procedure in reverse to install components step by step. Screw the last two screws back into bottom of the phone on both sides of the USB connector after back panel is firmly in place.

DescriptionHave you spent a long time to searching a LCD touch screen sssembly for your Apple products? Here comes the good news. As the emergence of this product, your search ends here. Adopt latest technology; it can be your best choice for replacement. With its high quality and practical applicability, it is worth buying absolutely. Addition, every LCD touch screen sssembly we sold is tested strictly before shipping, so the quality can be guaranteed. What¨s more, you won¨t worry about how to install it for you can get a pry tool for free and if there is any question, you can contact our service department. Thank you for your attention and placing an order

FEATURES

New high quality parts
It is used to repair replace your wrong, damaged, cracked, not recognised LCD touch screen bezel frame assembly
Make your iPhone looks new again
Each screen is tested before shipping and 100% working
Come with touch screen digitizer, frame
Note: Due to the complexity of iPhone structures, suggest you that seek the professional for dismantling your phone, otherwise it may be easy broken

Specifications

Color	Black
Compatible with	iPhone 4S
Note	Please upgrade the current system to the latest version when black-white screen issue occurs.
Dimensions	11.4 x 5.7 x 0.7cm / 4.49" x 2.24" x 0.28" (L x W x H)
Weight	1.16oz / 33g

Package Includes

1 x LCD Touch Screen Replacement Assembly for iPhone 4S Black

Extra Info

Note

Please make sure that the product is installed by professional, otherwise, you may damage the touch digitizer,LCD display screen and flex cable when disassembling or installing the product.Due to the complexity of iPhone iPad iPod structures, suggest you to seek the professional for dismantling and installing your phone, otherwise may be easy broken it.We´ll not bear the loss of incorrect installation and purchase ,thanks for your understanding.