100% Brand New 0-6" (0-150mm) LCD digital vernier caliper.
Test every piece before shipping to you
shipping with original retail plastic box
Smooth sliding
Electronic Digital Vernier Caliper
Made of hardened stainless steel
Linear capacitive measuring system
Zero setting in any position
With a small locking thumb screw which locks the jaws in place
Base measuring function: Inside， outside， depth and step measuring
An ideal tool for a broad range of industrial measuring
1. Internal measuring jaws
2. METRIC/INCH change over
3. Locking screw
4. LCD display
5. External measuring jaws
6. Power of button
7. Zero setting and power on button
8. Battery cover
9. Depth measuring blade
10. Step-measuring faces
Specifications:
Measuring range: 0~150 mm/ 0~6 inch.
Resolution: 0.01mm/ 0.0005 in.
Repeatability: 0.01mm/ 0.0005 in.
Accuracy: + 0.02 mm/ 0.001 in. (<100 mm)， + 0.03 mm/ 0.001 in. (>100 150 mm)
Maximum measurement speed: 1m/s
Power: 2 x 1.5V SR44 (silver oxide cell) battery ( NOT included)
Battery life: 1 year for continuous usage / 3 years under normal operation
MAINTENANCE INSTRUCTIONS
1. Clean caliper bar with dry cotton fabrics before using in order to avoid mad display of caliper caused by humidity，
2. Keep the caliper clean and dry (Liquid can damage the slider)，
3. Faces should be cleaned gently with cotton fabrics. Never use petrol， acetone and other organic solutions.
4. In order to save power， turn of the unit when caliper is going to stay idle for some time.
5. Never apply and electric pressure on any part of the caliper and never use an electric pen for the fear of damaging its chip.
6. For other notes please refer to the conventional calipers.
7. Accidental wrong display may happen while replacing the battery， just take outthe battery and the put it in again after more than 30 seconds until the display returns to normal