Description:
Fixed eight on-time selection.
Maximum watering time 99 minutes， the shortest time of 1 minute watering.
24 Hour cycle also can be realized for each different watering time.
Using a 9V alkaline batteries can be used continuously for one year， is very energy efficient.
With manual work and low power battery auto-off feature.
Waterproof process design， excellent performance， safety and reliability.

Feature:
Material : ABS
Monitor : LCD
Operating voltage: DC9V alkaline battery laminate;
Static current consumption: !#!amp!*!le;30uA;
Clock error: !#!amp!*!le;0.6 seconds \/ day;
Suitable pressure: 0.05 ~ 0.8MPa;
Can be connected to faucets and plumbing.
Faucet: both quarter (1\/2'') and six (3\/4'') faucets must with thread
Pipes: hoses and hard tube.
Two models of hoses: quarter (1\/2'') and six (3\/4'')
The hard tube must have thread link to the timer.

Instructions:
This water timer consists by two parts. Part A is to control the circuit ， part B is the valve. Pull out part A by hand to separate it. Otherwise， combine two parts.




How to use:
This timer had been set a program. Watering twice a day， one is 7 am， the other is 6 pm. The watering time is five minutes.
After install the battery and adjust time， the watering timer will be able to work. Otherwise， you can adjust a program according to the following steps:

1. Manual operation
In closed state of the valve， press the !#!amp!*!quot;+!#!amp!*!quot; key to manual operation， as shown !#!amp!*!quot;ON!#!amp!*!quot; on the left upper corner of the screen (figure 1)， the timer is on the watering status， press !#!amp!*!quot;+!#!amp!*!quot; key to forced it to turn off the watering status (enter the state of automatic).

2.Clock Adjustment
In the automatic state， press !#!amp!*!quot;M!#!amp!*!quot; key once， the first two digits flashes (hours digits of the clock)， press the !#!amp!*!quot;+!#!amp!*!quot; key to adjust， press the !#!amp!*!quot;!#!amp!*!gt;!#!amp!*!quot; key to switch to the last two digits(minutes digits of the clock)， press the !#!amp!*!quot;+!#!amp!*!quot; to adjust， after the adjustment is completed， press the !#!amp!*!quot;M!#!amp!*!quot; key twice or wait 5 seconds， the timer will be automatically revert to the automatic state.

3. Timing setting
In the automatic state， press !#!amp!*!quot;M!#!amp!*!quot; key twice to enter the time setting. then show character !#!amp!*!quot;\u25b3!#!amp!*!quot; flashes in the workplace (Figure 3)， press the !#!amp!*!quot;!#!amp!*!gt;!#!amp!*!quot; key to select， press the !#!amp!*!quot;+ key!#!amp!*!quot; to confirm， meanwhile show !#!amp!*!quot;00 !#!amp!*!quot;(Fighre. 4). Press !#!amp!*!quot;+!#!amp!*!quot; key to set watering time (0-99 minutes)， press the !#!amp!*!quot;!#!amp!*!gt;!#!amp!*!quot; key and the '+' key repeatedly can set the 8 switch times respectively . After the setting completed， press the !#!amp!*!quot;M!#!amp!*!quot; key twice or wait 5 seconds， the timer will be automatically revert to the automatic state.
One day has 8 opening time ， 7:00 ， 8:00， 10:00， 12:00， 14:00， 16:00， 17:00， 18:00， can optional choose one ， two ...... or