low price item!!! Please buy over S$9.9 storewide， single order will not process， thanks for your understanding
Power supply voltage: AC 220V 50HZ

Output voltage: AC 24V

Maximum power: 55W

Temperature range: 180-450 ℃

Overall Volume: (W) 130x (H) 90x (D) 141 mm

Host Weight: 1.50Kg (without handle)

Ground Resistance: ≤2Ω (factory default)

Ground voltage: ≤2mV (factory default)

Iron handle: SBK907D

Heating Element: 1323 stainless steel heating element

Wire device: 1.5m

Temperature error: ± 2 ℃ still air: 25 ℃ -45%

●Device Host: 1 set

● handle components: Group 1
● soldering iron stand: 1
● Power line: 1
● Clean sponge: 1
● Instructions: 1
Use Method
1. Instructions
● Connect the iron and console.
● power supply.
● Switch on the power indicator LED that is illuminated.
● Temperature control Temperature position.
● proper temperature.
Too low temperature will slow the flow of solder， high temperature solder flux will burn and turn white concentrated dry up， resulting in Weld or burn circuit boards. When the tip temperature welding point according to the needs set properly， a good solder joint can be confident. Solder alloy commonly used in the electronics industry is 60% tin， 40% lead (60/40). Tip for soldering appropriate according to different manufacturers vary temperature， hereby listed below:

Melting point	215℃
The general temperature	270~320℃
Assembly line temperature	320~380℃

Note: The general use should not exceed 380 ℃. If you need to use a higher temperature， short-term use is permitted