Installed in a Brand New Housing</br>Brand New Factory Lamp</br>1) Unplug the TV from the wall socket 2) While the TV is unplugged?? press and hold down the power button in the TV for approx 30 seconds. 3) Leave the TV unplugged for 2 hours. 4) After 2 hours?? plug in the TV and turn ON the television.</br>Generic replacement lamp</br></br>Product Description</br></br>Brand New Compatible Lamp Installed in a brand new housing ****** User Instructions ********1. Make sure the projector is powered down (if in use?? wait at least 10 minutes for the lamp to cool) and for added precaution remove the power cable. 2. Turn the unit over and locate the lamp panel?? once located?? unscrew and remove the cover. 3. Unscrew the 2-3 screws holding the lamp in place and carefully slide the lamp out of the projector. 4. Remove the new lamp from its packaging. Make sure not to directly touch the lamp only the outer casing. Oils and debris from hands and fingers will cause "potting" which will lead to overheating and ultimately decreased lamp life. 5. Alight the guides on the new lamp holder with the guides inside the unit and gently slide the lamp into place. 6. Insert and tighten the screws on each side of the lamp holder. When replacing the lamp housing make sure the new housing is secure and seated completely before operation. 7. Place the cover back on the unit and re-install the screws. 8. Plug the projector back into the power supply and restart the projector. 9. After the unit powers on?? locate the lamp counter in the menu and reset the counter to zero.</br><br/>http://www.amazon.com/gp/product/B001TJT1T22 pla