This is a stable and quick rechangeable studio flash system with 100% brightness release. It's power is variable from stepless 1/32 to 1.It's capacitor can discharge automatically when it's not in use. It could be connected with the wireless remore control,while effective to prevent from the interference and high sensitive signal received. The brightness of the modeling lamp is directly proportional to that of the flash tube, so that you can preview the lighting effect before taking the pictures. Besides,it contains a perfect notification design for fully-charged and over-heat condition. When it's fully charged,it will buzz and the indicator will be on as green. FT series use the advanced voltage stabilizer and fault protection device. That signifies the most durable,user-friendly and professional oriented.

 

Notice:

1.The flash tube keeps clear to prevent from reduction of lighting.Please use the cloth with Alcohol to clean it.

2.Swith off the power for at least 10 minutes before changing the flash tube.

3.Please do not open the case or body of the power pack without the instruction of the technicians as high voltage is inside the body of the power pack.

4.Dont's slave flash continuously more than 5 times within one minute.It's protection to avoid work overload caused damage.

5.Turn off the power supply when the task is completed.