- Color: Black- Material: Plastic- Features:- Operating voltage: DC 4.5 ~ 30V; - Features:- Operating voltage:DC 4.5 ~ 30V- Measure voltage: DC 0 ~ 100V- Minimum resolution(V): 0.1V- Measure current:100A (require external shunt)- Minimum resolution(A): 0.1A- Operating current: <20mA- Display: three 0.28" LED digital tube- Display color: Red and Blue (two-color display)- Dimensions: 48 x 29 x 21mm- Mounting cutout: 45.5 x 26.5mm- Refresh rate: about 500mS / times- Measure accuracy: 1% (＼ 1 digit)- Operating temperature: -10 to 65＜c- Operating Humidity: 10 to 80% (non-condensing)- Working pressure: 80 to 106 kPa- Applications:Suitable for automotive/electric cars/motorcycles battery monitoring or other products voltage current measurement- Wiring:- Black line (thin): vacant or buck circuit (module) negative- Red line (thin): power supply+- Black line (thick): COM、 common measuring- Red line (thick): PW+、 measuring terminal voltage input positive- Yellow line (thick): IN+、 current input+- (Please refer to the wiring diagrams for more details)- Notice:- The voltage between the thin red and thin black lines must be within DC 4.5-30V- The ammeter can only be connected to the negative of the device under test- Exceeds 5A、 long-term full load working continuously、 it is recommended that the measurement side of the leads are directly soldered to the socket- When the black thin line vacant、 it is better to use insulating tape around the exposed part of the wire、 to prevent short circuits- If just be used as a voltmeter、 it is recommended that the yellow line and the black line were connected together、 to prevent the ammeter digital flashing- Packing List:- 1 x Digital Volt Amp Meter- 1 x 100A/75mV DC Current Shunt
- Operating voltage: DC 4.5 ~ 30V;
- Operating voltage:DC 4.5 ~ 30V
- Measure voltage: DC 0 ~ 100V
- Minimum resolution(V): 0.1V
- Measure current:100A (require external shunt)
- Minimum resolution(A): 0.1A
- Operating current: <20mA
- Display: three 0.28" LED digital tube
- Display color: Red and Blue (two-color display)
- Dimensions: 48 x 29 x 21mm
- Mounting cutout: 45.5 x 26.5mm
- Refresh rate: about 500mS / times
- Measure accuracy: 1% (＼ 1 digit)
- Operating temperature: -10 to 65＜c
- Operating Humidity: 10 to 80% (non-condensing)
- Working pressure: 80 to 106 kPa
- Applications:Suitable for automotive/electric cars/motorcycles battery monitoring or other products voltage current measurement
- Black line (thin): vacant or buck circuit (module) negative
- Red line (thin): power supply+
- Black line (thick): COM、 common measuring
- Red line (thick): PW+、 measuring terminal voltage input positive
- Yellow line (thick): IN+、 current input+
- (Please refer to the wiring diagrams for more details)
- The voltage between the thin red and thin black lines must be within DC 4.5-30V
- The ammeter can only be connected to the negative of the device under test
- Exceeds 5A、 long-term full load working continuously、 it is recommended that the measurement side of the leads are directly soldered to the socket
- When the black thin line vacant、 it is better to use insulating tape around the exposed part of the wire、 to prevent short circuits
- If just be used as a voltmeter、 it is recommended that the yellow line and the black line were connected together、 to prevent the ammeter digital flashing
- 1 x Digital Volt Amp Meter
- 1 x 100A/75mV DC Current Shunt Dimensions: 1.89 in x 1.14 in x 0.83 in (4.8 cm x 2.9 cm x 2.1 cm)
Weight: 2.61 oz (74 g)