Video


Specification:

The RGBW bulb  is with RGB and white. It can be controlled  by four different zones， different programs， dimming / brightening and changing the color you like.

The package is only with a RGBW LED bulb， the remote control is not included. If you would like the remote control，  you could have a look at the 2.4G RF RGBW Remote Control .

Connector	E27
Type	Globe Bulb
Light Color	RGB+White
Material	Aluminum
Bulb Features	Dimmable
Specific Uses	Indoor use only
Wattage (W)	6
Voltage (V)	AC 85-265V 50-60HZ
LED Quantity	26
Light Source	SMD 5630
Beam Angle	180°
Dimension (mm)	122 x 60

Description:
1. WiFi controller， effective receiving distance nearly 30m.
2. Heat radiation. Solid State. Shockproof and vibration proof
3. Eco-Friendly.CE RoHS compliant. No lead or mercury. No UV or IR Radiation.
4. Reduce re-lamp frequency. Lifespan is over 30000 hrs. Save effort and maintenance costs on changing bulbs frequently.
5. Easy Installation. Can be easily fitted instead of ordinary incandescent or CFL light bulbs. Have fun and enjoy the light.

Programs:
Program 1 (RGB Fade In Fade Out )
This program fades in and fades out the color red， green， blue， and white one after anther .
Program 2 (Color Flash )
In this program， red， green， blue， white， yellow， purple flashes to change .
Program 3 (Disco)
Different colors strobe and flash to change
Program 4 (Red color Ramp up and flash)
In this program， red color brightens from 0%-100% and shuts down. then flashes three times.
Program 5 (Green color Ramp up and flash)
In this program， green color brightens from 0%-100% and shuts down， then flashes three times.
Program 6 (Blue color Ramp up and flash)
In this program， blue color brightens from 0%-100% and shuts down， then flashes three times.
Program 7 (Color Change+Flash)
Here several colors fade into each other and then flash randomly.
Program 8 (Fade in and Fade out)
Here different color fade into each other.
Program 9 (Strobe White )
Just white color flashes up.

>Basic control functions(As shown on the right picture)
Long press "Master ON/ZONE ON" button，you can get the white mode.
Touch the color ring ，you can get any color
And you can change the brightness by the brightness ring+ -.

Programs:
Program 1 (RGB Fade In Fade Out )
This program fades in and fades out the color red ，green ，blu ，and white one after anther .
Program 2 (Color Flash )
In this program ，red ，green ，blue ，white ，yellow ，purple flashes to change .
Program 3 (Disco)
Different colors strobe and flash to change
Program 4 (Red color Ramp up and flash)
In this program ，red color brightens from 0%-100% and shuts down .then flashes three times.
Program 5 (Green color Ramp up and flash)
In this program，green color brightens from 0%-100% and shuts down，then flashes three times.
Program 6 (Blue color Ramp up and flash)
In this program，blue color brightens from 0%-100% and shuts down，then flashes three times.
Program 7 (Color Change+Flash)
Here several colors fade into each other and then flash randomly.
Program 8 (Fade in and Fade out)
Here different color fade into each other.
Program 9 (Strobe White )
Just white color flashes up.

Tips:
To dim all RGBW lights at once or change the color ，first press "Master ON".Todo this with individual lights .first press "Zone ON"，Secondly，choose the color brightness or brightness according to the color ring or brightnessring.


>Linking & unlink the light

Linking new lights to the remoute control
1.Choose which zone you want to assign the light (1 to 4)
2.Switch off the main power supply of the light in the selected zone with the main switch or pull the plug from the socket.
3.Now switch on the light again and within 3 seconds shortly press one of the "Zone ON" buttons one time on the remote conctrol.
4.When this link operation is successful ，the light slowly blinks 3 times on and off.

Unlinking the lights:
1.Check via the remote the control to see which zone (1 to 4) is already linked to a light.
2. Switch off the main power supply of the light with the main switch or pull the plug from the socket.
3.Now switch on the light again within 3 seconds press 5 times quickly and shortly on one of the "Zone ON" buttons which you want to link.
4.When this unlink operation is succesful，the light quickly blinks 6 times on and off.

Grouping of several lights
You can add an endless numbers of lights to a zone on the 4 channel remote by linking the lights to different zones.This way you are completely flexible in creating different group combinations .Below you can see some grouping examples.

Kind remind:
we recommend using rechargeable batteries for the remote controls.For that reason，we don't include ordinary batteries.We hope you appreciate our environmental friendly choices and they do not cause you any inconvenience.

Instruction:
Safety Guide:To reduce the risk of electric shock， please ensure the light socket if turned off at the wall light switch before replacing light bulbs.
Bulb and Wireless Remote/App Installation:
1. Battery Installation:Please take the remote control and carefully press the battery cover and push it away in a downward motion.
2. App installation:Download and finish the installation of the iOS or Android App as per Wifi Controller User Installation
3. LED Bulb Installation:
·Take the led bulb out of the packaging， holding it only by the acrylic lens.
·Switch off the power at the wall or lamp switch before installation.
·Replace the original light bulb with the new Wireless Smart LED Bulb.
·Switch on the power， the led bulb will light under normal circumstances.
·If the bulb does not sync， then firstly clear the previous channel as per Unlinking the lights (from the RGBW Remote Control User Instruction). - See more at: http://www.eachine.com/ThorFire-Touch-Remote-Control-Color-Changing-LED-Blub-RGBW-Dimmable-Light-Samsung-Chips-E27-6W%2850W%29-Model-G1-p-25.html?utm_design=13&utm_source=emailvision&utm_medium=Mail_eachine02_all&utm_campaign=newsletter&utm_content=Echo#sthash.zCvlR1P9.dpuf>Basic control functions(As shown on the right picture)
Long press "Master ON/ZONE ON" button，you can get the white mode.
Touch the color ring ，you can get any color
And you can change the brightness by the brightness ring+ -.

Programs:
Program 1 (RGB Fade In Fade Out )
This program fades in and fades out the color red ，green ，blu ，and white one after anther .
Program 2 (Color Flash )
In this program ，red ，green ，blue ，white ，yellow ，purple flashes to change .
Program 3 (Disco)
Different colors strobe and flash to change
Program 4 (Red color Ramp up and flash)
In this program ，red color brightens from 0%-100% and shuts down .then flashes three times.
Program 5 (Green color Ramp up and flash)
In this program，green color brightens from 0%-100% and shuts down，then flashes three times.
Program 6 (Blue color Ramp up and flash)
In this program，blue color brightens from 0%-100% and shuts down，then flashes three times.
Program 7 (Color Change+Flash)
Here several colors fade into each other and then flash randomly.
Program 8 (Fade in and Fade out)
Here different color fade into each other.
Program 9 (Strobe White )
Just white color flashes up.

Tips:
To dim all RGBW lights at once or change the color ，first press "Master ON".Todo this with individual lights .first press "Zone ON"，Secondly，choose the color brightness or brightness according to the color ring or brightnessring.


>Linking & unlink the light

Linking new lights to the remoute control
1.Choose which zone you want to assign the light (1 to 4)
2.Switch off the main power supply of the light in the selected zone with the main switch or pull the plug from the socket.
3.Now switch on the light again and within 3 seconds shortly press one of the "Zone ON" buttons one time on the remote conctrol.
4.When this link operation is successful ，the light slowly blinks 3 times on and off.

Unlinking the lights:
1.Check via the remote the control to see which zone (1 to 4) is already linked to a light.
2. Switch off the main power supply of the light with the main switch or pull the plug from the socket.
3.Now switch on the light again within 3 seconds press 5 times quickly and shortly on one of the "Zone ON" buttons which you want to link.
4.When this unlink operation is succesful，the light quickly blinks 6 times on and off.

Grouping of several lights
You can add an endless numbers of lights to a zone on the 4 channel remote by linking the lights to different zones.This way you are completely flexible in creating different group combinations .Below you can see some grouping examples.

Kind remind:
we recommend using rechargeable batteries for the remote controls.For that reason，we don't include ordinary batteries.We hope you appreciate our environmental friendly choices and they do not cause you any inconvenience.

Instruction:
Safety Guide:To reduce the risk of electric shock， please ensure the light socket if turned off at the wall light switch before replacing light bulbs.
Bulb and Wireless Remote/App Installation:
1. Battery Installation:Please take the remote control and carefully press the battery cover and push it away in a downward motion.
2. App installation:Download and finish the installation of the iOS or Android App as per Wifi Controller User Installation
3. LED Bulb Installation:
·Take the led bulb out of the packaging， holding it only by the acrylic lens.
·Switch off the power at the wall or lamp switch before installation.
·Replace the original light bulb with the new Wireless Smart LED Bulb.
·Switch on the power， the led bulb will light under normal circumstances.
·If the bulb does not sync， then firstly clear the previous channel as per Unlinking the lights (from the RGBW Remote Control User Instruction). - See more at: http://www.eachine.com/ThorFire-Touch-Remote-Control-Color-Changing-LED-Blub-RGBW-Dimmable-Light-Samsung-Chips-E27-6W%2850W%29-Model-G1-p-25.html?utm_design=13&utm_source=emailvision&utm_medium=Mail_eachine02_all&utm_campaign=newsletter&utm_content=Echo#sthash.zCvlR1P9.dpufInstruction:
Safety Guide:To reduce the risk of electric shock， please ensure the light socket if turned off at the wall light switch before replacing light bulbs.
·Take the led bulb out of the packaging， holding it only by the lens. 
·Switch off the power at the wall or lamp switch before installation.
·Replace the original light bulb with the new Wireless Smart LED Bulb. 
·Switch on the power， the led bulb will light under normal circumstances.

Package Included:
1 x 2.4G RF 6W RGBW LED Bulb (not included remote control)