Studio : Comenzar

Publisher : Comenzar

Product Description

Size:2.2"(D) x 8"(H)

Material:Real Wax
How to inserting the batteries
1.Open the battery compartment cover by pushing the latch back and removing the cover completely.

2.Insert 2 x AA batteries into the battery compartment according to the polarity indicators inside the compartment.

3.Close the battery compartment cover by placing the 2 small tabs in the slots and pressing down to secure the latch.
How to illuminating the Candle
Move the OFF-ON switch on the bottom to ON. The candle will illuminate until you manually move the switch to OFF.

ON-OFF button:Illuminating the Candle On=Off(Note:Before you use the Remote Control, switch the ON-OFF button to ON at the buttom of the LED candles)

TIMER:set On/Off Automatic Time feature, set to 2Hours/4Hours/6Hours/8Hours

*For example, s et 2H at 19:00, it will automatically shutdown at 21:00.

Will be automatically open at 19:00 next day, at 21:00 then automatically shut down.

It will cycle every 24 hours.

Mode:Candle-Non-Moving Flame;Light-Moving Flame

Brightness Control: Left button to lower the brightness Right button to increase brightness.
More tips:
Pull out the palstic sheet before use.

If the flame doesn't move after yor press "light" button, press to increase brightness to maximum.

If the battery of the Remote Control runs out, you may pull out the battery tray then replace a new button cell battery.

0