AVAILABLE QSC K SERIES:
K8 - 8″ ACTIVE LOUDSPEAKER
K10 - 10″ ACTIVE LOUDSPEAKER
K12 - 12″ ACTIVE LOUDSPEAKER
K10
Active Loudspeaker
FEATURES
- 10” Woofer; 1.75” diaphragm compression driver
- 90° conical DMT coverage
- Maximum SPL 129 dB peak
- Attractive and professional appearance
- Rugged ABS enclosures
- 16-gauge powder coated steel grille
- 1000-watt continuous Class D power modules in all models
- Functions as a monitor wedge
- Comfortable ergonomic handles
- 35 mm pole sockets with Tilt-Direct™
- M10 rigging points
- Eyebolt and yoke mount accessories available
- Onboard mixer with two combo XLR and ¼” inputs, and stereo RCA inputs, (three audio input sources); two direct channel outputs and single summed balanced output
- Extensive DSP enhances system performance:
- DMT™ (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones.
- Intrinsic Correction™, first featured in our high-end line-array products maps 65–75 spatially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat band pass target. The result is a speaker that behaves equally well across the entire sound field.
- DEEP™ and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies.
- GuardRail™ protection protects both the amplifier module and your performance from unnatural and destructive clipping.
|
SPECIFICATIONS |
K10 |
|
Configuration |
Multipurpose 2-way |
|
Transducers |
|
|
Frequency Response (-6 dB) |
60 Hz - 18 kHz |
|
Frequency Range (-10 dB) |
56 Hz - 20 kHz |
|
Nominal Coverage (-6 dB) |
90° conical DMT |
|
Maximum SPL1 |
129 dB peak |
|
Amplifiers |
|
|
Power Output2 |
1000 W continuous Class D |
|
Input Impedance |
XLR / ¼": 40 kΩ balanced / 20 kΩ unbalanced |
|
Controls |
Power, Gain A, Gain B, Mic/Line, LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit) |
|
Indicators |
Power, Signal A, Signal B, Standby, Limit, Mic |
|
Connectors |
Balanced female XLR/¼" line/mic level input, Balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector |
|
Cooling |
On demand, 50 mm variable speed fan |
|
Amplifier Protection |
Thermal limiting, output overcurrent, overtemperature muting, GuardRail™ |
|
Transducer Protection |
Thermal limiting, excursion limiting |
|
AC Power Input |
Universal power supply 100–240 VAC, 50 to 60 Hz |
|
AC Power Consumption |
100 VAC, 2.3 A |
|
Enclosure |
|
|
Material |
Impact resistant ABS |
|
Finish |
Black paint |
|
Grille |
Rugged powder-coated steel |
|
Dimensions (HWD) inches |
20.4 × 12.6 × 11.8 |
|
Dimensions (HWD) mm |
519 x 320 x 300 |
|
Weight (Net) |
32 lb / 14.5 kg |
|
Available Accessories |
K10 Tote, K10 Yoke, M10 Kit-C |