In-Ground Underground Waterproof Pet Dog Train Control Device Collar Shock Collar Electric Fence Fencing System

Product Description

Description:
This hidden fencing system is the most reliable, cost-efficient and available pet containment systems today. A buried wire can transfers a harmless radio signal. When you dog approach the boundary, the signal causes the collar receiver to deliver a warning beep first. If your dog continuously closes to the boundary, the system will issue a mild shock. If your dog still close to the boundary, the system will issue stronger shocks until your dog returns back to the range your have set up. Your dog will naturally seek to avoid mistake and is content with staying within established boundaries. You can't miss it!

Features:
1. Pulsed Proportional Stimulus: The closer your dog is near to the boundary, the more intense the shock will be.
2. Progressive Tone Stimulus: A warning tone will be issued first, then a shocking stimulus after 4-10 seconds. if your dog continues to move close to the boundary the shock stimulate will become stronger.

3. Variable Field Width Control: Allows you to precisely control the width of the signal field

4. Audible and Visual Wire Break Indicator: If your buried wire breaks, a loud sonic alarm will sound accompanied by a flashing light

5. Speed Detect Anti-Run through: The faster your dog is moving, the quicker and the higher level of intensity is issued

6. Built-in Lightning Protection: Protects transmitter from power surges caused by lightning strikes.

7. Multiple Collar Operation: Can add as many collars as your want so as to control as many animals as you have. There is no limit to the number of collars it can control.

8. Up to 5000 square meters range: Over 1.2 acre.


Specification:
Size: the indoor wall mounted transmitter:14.5 x 8.1 x 3.2cm
Collar Max. Circumference: 58cm

Color: Black

Package weight: 20.9 oz/593g

How to use:
1) Wall-mounted transmitter: Transmitter is the central controller to whole electronic system. Make sure the wire is set to a loop.
2) The receiver collar: Receiver (collar) will make a warning beep firstly and then continuous stimulation if your dog attempts to approach wire boundary.

How to install the system:

1. Design your controlling area and calculate the amount of wire needed.

2. Install the wall transmitter.

3. Lay out the wire of perimeter.

4. Connect the perimeter wire to the wall transmitter.

5. Verify that the transmitter is functioning and has no problem.

6. Set up the receiver, then test the containment system and adjust the field width.

7. Install the boundary wire and training flags.

8. Wear collars to your dogs and train your dogs. Then you can enjoy with the trained dog

Note:
1. under any circumstance, the length of the electric cable cannot less than 15m. Do not adjust the ranging control knob to the whole log when the cable length is just more than 15m or the transmitter on the wall will be burned (when adjust it to the 1/3 means the maximum). if you plan to adjust the ranging control knob to the whole log, the cable length must be more than 100m. If the cable length is less than 100m, you can make the cable become dual ring or more, which can safely operate and let the length of the cable is more than 100m

2. Do not parallel the loop circuit and electron, telephone, television and the buried electric cable in other yard within two meters

3. Do not operate within 3 meters of the electric cable, or some part of signal will be deleted

4. Do not operate the electric cable in the range that there cannot has the cable that prevent the system within 3 meters

5. Do not operate the electric cable in the place that has the steel three centimeters under the earth, or the signal will be weakened

What is included:
1x Indoor Wall mounted transmitter

1x Power plug

1x Adjustable receiver collars

1x Boundary wire of 300 meters

2x Extra metal contact points

20x Training flags

1x Test bulb

4x Screws

1x User's manual