0.1 to 125 watt power range (SSB and CW, 30W on PSK), 100W on 6M. - 2000 memories for instantaneous band changing. - Controlled from Kenwood Tuner button on radio. Powered from Kenwood radio.
Works with any Kenwood radio that is AT-300 compatible (check your radio''s manual). - Partial radio list: TS-2000, 50, 450, 480SAT (not HX), 570, 590, 850, 870, 990 (and all variants). - Tuning time: 0.1 to 6 seconds full tune, 0.1 seconds memory tune.
1.8 to 54.0 MHz coverage. Built-in frequency sensor. - Tunes 6 to 1000 ohm loads (16 to 150 on 6M), 6 to 4000 ohms with optional 4:1 Balun. - For Dipoles, Verticals, Vs, Beams or any Coax Fed Antenna.
Includes Kenwood interface cable. Ready to use right out of the box. - Small Size Enclosure: 6.5L'' x 6.5W'' x 1.5H''. - Weight: 2 pounds
* Note for use with TS-480HX: Kenwood has programmed the 480HX so that if it detects an external tuner, it will limit the RF power to 100 watts. It is not modifiable as far as we know. While the KT-100 can be connected to the 480HX, the radio will never transmit more than 100 watts. We would normally recommend the LDG AT-200Pro for the TS-480HX if the full 200 watts is required.

Technical Details

Product Details

Product Dimensions

Package Dimensions
Width : 9.3 inch
Height : 6.5 inch
Length : 10.5 inch

Item Weight: 1.5 pounds (View shipping rates and policies)
Shipping Weight: 2.35 pounds (View shipping rates and policies)

ASIN : B00KH96KB2