The SESF02 is a new type of energy saving motion night light. The light become brighter and service time longer. When reached a certain degree of illumination, it adopts PIR technology to sense motion and turn on the light automatically. It can identify day and night automatically . At night when one enters its detection field, the lamp will shine and after leaves it will go out automatically. If you want the light to remain on for an extended period of time, just slide the switch to the “ON” setting to turn the light on and deep it on, until you turn the switch off.
Description
1.Power source: 4x1.5V AA batteries(not included)
2.Working current : 90mA
3.Static current : 30~40uA
4.Time delay: 10±2sec
5.Detection range: 5m(24°C)Max
6.Detection angle:120°
7.Working temperature:-10~+40°C
8.Working humidity:<93%RH
9.Light-control:<10LUX
10. LED quantity: 6pcs
11.Single Power: 0.06W
12.Rated load:0.36W Max
Operation
1.Slide the switch to "ON", the lamp is always on, here no sense function.
2.Slide the switch to "OFF", the lamp is powered off.
3.When the light of the environment is at less than 10 LUX, Slide the switch to "AUTO", The sensor is activated. The lamp will turn on when motion is detected. The lamp will automatically turn off 10±2s later after the last motion is detected.
4.Low-voltage Alarm: when the battery power is shortage, after the Products detect mobile signal. The red LED will flicker every 5sec until the user replace batteries.
5.Time-day is added continually : When it receives the second induction signals after the first induction, it will compute time once more on the rest of the first time--day basis(set time).
Installation Steps
1.Press plug piece of the base hole
2.rotate the base plug piece
3.take out the base plug piece
4.put the screw into the hold , and fixed on the wal
5.rotate the night light on the base plug piece
**Attention:
1.The produt shouldn't be used in the zones the air temperature changes boviously :for example air conditioning and air heating.
2.In front of the detection window there should be no obstruction or moving object to effect its detecting.
Package Contains
