Barb system offers lowest material cost
Resists corrosion and scale build up
No waiting for glue to dry or joints to cool
Lead Free Compliant

Technical Details

Product Details

Product Dimensions

Package Dimensions
Width : 3.4 inch
Height : 0.5 inch
Length : 5 inch

Item Weight: 0 ounce (View shipping rates and policies)
Shipping Weight: 0 ounce (View shipping rates and policies)

ASIN : B007AHGKSW

Product Description

SharkBite 1/2'' x 1/2'' Lead Free Brass Barb Insert PEX Drop-Ear Elbow for connecting 1/2'' cross link polyethylene PEX tubing to 1/2'' male iron pipe thread pipe end or fitting. The drop-ear allows the fitting to be screwed down to secure the joint and hold firmly in place. Secure barb ends of fittings to PEX pipe with cinch clamps and cinch tool, or copper crimp rings and crimp tool. Immediately testable to well over 100 PSI. Meets the new NSF/ANSI standard 14-2009 and ASTM F 1807-9SI standard for products intended for the transport of potable water. ANSI/NSF Standard 61 Annex G for lead free compliance and the wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight to meet AB1953 California and VT S152 Vermont low lead restrictions. Size: 1/2'' x 1/2'' FNPT Lead free brass For connecting 1/2'' cross link polyethylene PEX tubing to 1/2'' male iron pipe thread pipe end or fitting. The Allows the fitting to be screwed down to secure the joint and hold firmly in place. Secure fittings to PEX pipe with cinch clamps and cinch tool, or copper crimp rings and crimp tool Immediately testable to well over 100 PSI Meets The New NSF/ANSI Standard 14-2009 and ASTM F 1807-9SI standard ANSI/NSF standard 61 Annex G for lead free compliance The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight Meet AB1953 California and VT S152 Vermont low lead restrictions.