1， the beacon with chrome plated zinc alloy material， never rust.

Base 2， an olive shape， thick and solid. Fine workmanship， quality first-class.

3， the bottom using 3M glue. Product weight: 420G

Method of use:

1， thoroughly clean the need to paste the logo location， and make this position drying.

2， the standard base 3M glue off， stick in the proper position， slightly long pressing aminutes.

Product introduction:

Luxury car beacon， according to the original standard size and design， using a special material， compared with similar products market， quality first-class， can let your car is more noble!

Product features

1， the zinc alloy material and fine quality.

2 icons， colors and patterns are used as Khao paint process， expose to wind and rainalso not fade.

3， the lower seat is thick base， heavy and solid， 3M strip from under the table will bedirectly pasted can stick to clean， dust-free， veneer， anhydrous oil-free).

4 this logo， exquisite workmanship， high texture， put on your car， the more distinguished!

5 installation surface clean， tore off the mark on the back of the paper， the alignment is affixed to the installation location， press tightly， paste is very firm， won't damage your car