Item Descriptions:

size:

L size

Product introduction

Fit tightly to the movement of the waist ●.

It is a thin type pressure supporter "Professional Fitz waist".

● Mesh fabric Approximately 0.8 mm thick type design, hard to stuff, comfortable.

● Waist assist structure + supplementary belt cross support design firmly supports the movement around the waist.

[Waist assist structure]

- Two bones support the stability of the waist

· Increase support feeling by plus the attached auxiliary plate

[Auxiliary Belt]

· Adjustable to your favorite support capacity

【How to choose the size】

※ When the waist circumference is 85cm, please choose L size.

M size ... waist circumference at waist position 75 to 85 cm

L size · · · waist circumference 85 to 95 cm in position

【How to use】

※ Please install so that the surface fastener does not stick to clothing.

(It will cause fraying and transmission lines.)

When you want to support the waist more firmly, put the auxiliary plate attached to the inside pocket.

(1) Adjust the supporter to the height of the navel position.

(2) Set the center of the supporter to the spine position.

(3) Please wind it around your body while pulling.

(4) Fasten the hook and loop fastener firmly.

(5) Pull the auxiliary belt and fasten the surface fastener firmly in the front joining section.

【Care】

[Supporter body]

Separate from other clothing and wash according to the directions of the washing mark.

1. Do not wash with other clothing.

(The surface fastener will cause damage to other clothing.)

2. Please remove the auxiliary plate from the inside pocket before washing.

3. When washing, please fasten the surface fastener to the main body.

(Washing without stopping, it will cause poor surface fastener attachment.)

4. Do not force dry such as dryer or iron.

5. Do not use bleach or softener.

(It will cause badly to the product.)

[Auxiliary plate]

Please wash with water or mild detergent.

Usage notes

1. Do not use in the following cases.

(Symptoms may be exacerbated. Please consult your doctor when appropriate for use.)

(1) Persons with allergies and skin irritability.

(2) There are abnormalities such as fracture, scratches, numbness, swelling, eczema, rash, etc. in the mounting part.

(3) When you think you are pregnant or pregnant.

2. Do not use something that does not match in size.

3. Do not use at bedtime.

4. Do not over tighten.

5. If the following abnormality occurs during use of this product, stop using it immediately and consult a doctor.

In case of abnormality such as scratches, pain, numbness, swelling, eczema, rash, etc. on the mounting part.

(Continued use may worsen the symptoms.)

6. Do not attach surface fasteners to the mesh fabric of the main body.

(It will cause to discolor the mesh cloth.)

7. Do not put anything other than the attached auxiliary plate in the inner pocket.

8. Do not use deformed auxiliary plates.

9. Do not place it in a place near fire or high temperature.

Features:

• Product size (width × depth × height): 120 × 40 × 225 mm
• Country of Origin: Vietnam
• Contents: 1 sheet
• Material: Body: Nylon, Polyester, Polyurethane, Other (Outside the Fiber) Auxiliary Plate: Polypropylene

Product information:

Shipping Weight: 163 g

Package Dimensions: 4.50 x 12.09 x 22.40 cm