PRODUCT NAME
Lotus LTS-3HP 3.5kW/120V Electric Tankless Water Heater
PRODUCT CODE: PROD3030145601
PRODUCT INFORMATION
3kW Tankless Water Heater.
110V Electric Water Heater (Hardwire ONLY, NO Plug).
Suggested flow 0.5 GPM (Gallons Per Minute) = 45F Temperature Rise.
This Unit is NOT Made for Cold Climates with Inlet Water Less than 51F. This Unit is Designed for a Single Sink Application ONLY.
Unit Requires (Sold Separately) a 30A Dedicated Breaker, 10 AWG Wire (Line, Ground, Neutral), 110V Service, and a 0.5GPM sink aerator. This is NOT a Plug in Unit. Must be Installed and Hardwired by a Licensed Professional.
Technical Details
Product Details
Product Dimensions
Package Dimensions
Width : 9.5 inch
Height : 4.25 inch
Length : 12.4 inch
Item Weight: 3.4 pounds (View shipping rates and policies)
Shipping Weight: 3.7 pounds (View shipping rates and policies)
ASIN : B01J7RJ6UG
Product Description
Perfect for hand washing sinks, this unit is specifically designed for a single sink application in moderate to warm climates (see sizing guide) with a suggested flow rate of 0.5 Gallon per minute (gpm) for optimal performance. Please keep in mind higher flow rate = lower temperature rise. Designed to work for both 110V and 120V. Wattage is based on maximum voltage. 120V will draw 3500 watts. 110V will draw 3000 watts. Energy efficient, save up to 50 percent of water heating costs. Perfect for residential and commercial use. For assistance prior to purchasing this unit, please call 18887836082 or e-mail info@paragongroupusa.Com. 3kW/110V Electric Tankless Water Heater. Unit requires, 30A dedicated breaker, 10 AWG WIRE (Line, Ground, Neutral), and 110V Service. Included in Packaging, Pressure Relief Valve (MUST be installed to Inlet Cold Water Connection), 0.5 Inch NPT Fittings, and Owners Manual. MUST be installed by a licensed professional according to the specifications listed in the Owners Manual. NOT a Plug in Unit, at no time can a plug be installed to the unit. This unit is designed for a single sink application ONLY. This unit is NOT made for cold climates with inlet water less than 51F. 0.5 GPM (Gallons per Minute) is necessary to activate unit. (Purchase separately) 0.5 GPM (Gallon Per Minute) sink aerator for optimal heating performance. Unit will ONLY power on with water flow.