1, The shell of Hanpow QC 3.0 quick charger is made of pure PC material produced by Bayer, with flame retardancy level up to V-0.
2, The plug pins of Hanpow QC 3.0 quick charger is made of copper alloy, coating with nickel of 3 u '' thickness, what made it anti-oxidation and more wearable, the designed capable of being inserted and pulled out not less than 30,000 times.
3, The USB interface of Hanpow QC 3.0 quick charger is made of aluminum alloy, coating with nickel of 3 u '' thickness, with designed capable of being inserted and pulled out not less than 30,000 times.
4, Two additional high-quality solid electrolytic capacitors added beside the output, which can work 3000 hours continuously in 105 ℃ high temperature, what is the highest standards of civil capacitor. As result, the Hanpow QC 3.0 power adapter is more effective in eliminating ripple current, making charging current more stable and more friendly to your device.
5, With three insulation design and the 3M thermal insulation sheet and thermal insulation adhesive between transformer and output port, the Hanpow quick charger cut off the impact of ionization produced by high-voltage transformer as well as the instant high-voltage surge when power on or off.
6, All Hanpow brand charger must be tested in aging test process, aging in a high temperature cabinet continuously for 6 hours. In the mean time, tested by a simulated lightning with voltage up to 3000V (lasting 5 ms) every two hours.Only after these harsh test, the qualified products will reach your hands finally.
Micro USB Cable, Hanpow Quick Charge 3.0 Compatible USB to Micro USB Data & Charging Cable for Android smartphones and tablets (3.6ft )
1, The external cladding of Hanpow 3.6ft Micro USB cable is made of high quality environmentally friendly TPE material, different from ordinary PVC material, TPE is high flexibility, anti-aging, difficult to break, non-toxic and feeling more smooth.
2, The USB and micro USB interface of Hanpow cable is made of aluminum alloy, coating with nickel of 3 u '' thickness, with designed capable of being inserted and pulled out not less than 30,000 times.
3, Interface injection molding process to prevent joint loose or poor conductivity result by twist, incorrect plug habits.
4, The internal cladding is made of aluminum foil, which designed to anti-electromagnetic, making data transmission more fast and stable;
5, The core of Hanpow quick charge cable is made of 4 wire, in which the black, red wires is for power supply and each consists of 12 copper filament with diameter of 0.18mm. The green one and white one wires is for data transmission, each consists of 7 same copper filament. All the filament is tinned and is more conductive than common bare copper filament. As result, Hanpow quick charge cable can support maximum voltage of 12V and maximum current of 2.5A, what is required by QC3.0 standards to ensure fast charge and less heat.