User Guide and Maintenance
1.Please rotate the bearings and wheels to check if they are rolling smoothly.
2.It is suggested to disassemble, clean,and add lubricant every 6 months paying extra attention to the moving parts,clearing them of grit and dirt so they move freely. Please make sure the parts specifications are correct with the dealers if some parts need to be replaced.
3.Make sure the front fork and wheels are fixed tightly, you can use a wrench to tighten the locking nut properly. Use firm pressure but don't over tighten.
4.The PU wheels maybe worn out after some time of use,please replace new PU wheels for a safe ride.
5.The wheels and wheel bearings can become worn after regular use and can be replaced easily. Remove the axle bolts with two Allen keys and slide the wheel off its fork. Replace with the new item,screw in the bolt through the aligned fork and wheel then tighten with an Allen key on either side at tighten securely.
6.Wipe with a damp cloth to remove dirt and dust. Do not use industrial cleaners as they may damaged the surfaces. Do not use alcohol-based or ammonia-based cleaners as they may damaged or dissolved some compohents or soften the decals or the grip surfaces adhesive.
7.Make sure all component are assembled and secured sturdy before each use.
