KINGSTON HYPER-X FURY 8GB DDR4 2400MHZ SINGLE RAM HX424C15FB/8

HX426C15FB/8

8GB 1G x 64-Bit

DDR4-2666 CL15 288-Pin DIMM 

DESCRIPTION

HyperX HX426C15FB/8 is a 1G x 64-bit (8GB) DDR4-2666 CL15 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 512M x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-2666 at a low latency timing of 15-17-17 at 1.2V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. The JEDEC standard electrical and mechanical specifications are as follows:

JEDEC/XMP TIMING PARAMETERS

• JEDEC/PnP:

DDR4-2666 CL15-17-17 @1.2V

DDR4-2400 CL14-16-16 @1.2V

DDR4-2133 CL12-14-14 @1.2V

•XMP Profile #1:

DDR4-2666 CL15-17-17 @1.2V

HyperX FURY DDR4 Features and Specifications:

• Easy to install1: plug-and-play functionality
• Automatic overclocking: reach faster speeds just by installing the memory, no adjustments in BIOS needed
• Cost-efficient: the perfect combination of price and DDR4 performance
• Unique: asymmetrical, signature FURY heat spreader
• Design: low profile, black heat spreader color and matching PCB
• Reliable: 100% factory tested at frequency
• Compatible: tested with all popular brands of motherboards
• Guaranteed: lifetime warranty, free technical support
• Frequency: 2133MHz, 2400MHz, 2666MHz
• CAS Latency: CL14-CL15
• Voltage: 1.2V
• Operating Temperature: 0°C to 85°C
• Storage Temperature: -55°C to 100°C
• Dimensions: 133.35mm x 34.24mm

FEATURES

Power Supply: VDD = 1.2V Typical

• VDDQ = 1.2V Typical

• VPP - 2.5V Typical

• VDDSPD = 2.2V to 3.6V

• Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals

• Low-power auto self refresh (LPASR)

• Data bus inversion (DBI) for data bus

• On-die VREFDQ generation and calibration

• Dual-rank

• On-board I2 serial presence-detect (SPD) EEPROM

• 16 internal banks; 4 groups of 4 banks each

• Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)

• Selectable BC4 or BL8 on-the-fly (OTF)

• Fly-by topology

• Terminated control command and address bus

• Height 1.340” (34.04mm), w/heatsink