device requirements and functions.
5 in 1 usb dc micro entrance， a channel independent charging and management system
2 for the two types of the charge current (/ 1000ma 500ma)
3. led display state of charge 50%， 75%， 100%， 25%
automatic recognition of lithium (lithium ion) battery and ni mh battery and manual selection of iron phosphate and (Liepo4) battery (battery automatic definition 1.2 / 3.7 to manually select 3 / 3.85 in battery) 4.
5 0 in the voltage activation functions， 1.6 - 2.2 can not charge
6 more， short circuit， intelligent identification of a battery and the battery detection and protection.
7 the constant current charging and constant pressure.
8 by the constant current， battery charger power supply 5v， 1a (micro connector)
9: the automatic identification function with standard ma usb 5 / 1000.
b: no function usb
and description
1 charger has a button to select the current charge， easy to use the current button. in any case， hold the option key and hold 2 seconds to convert 1000mA ma current charge， charging the battery from the choice of the key， if the need to charge the battery (3.85 in 3 to 5 seconds) in the state of charge.
2 to 5 in the charger， power charger， all led flash， if the battery is not charging， 500mA (led) display， to detect a bad battery led blinks.
3 connect the battery charger， automatic determination of lithium in the (li - ION) and 1.2 (ni - mh) nimh rechargeable.
iron phosphate 3.0 (3.85 Liepo4) and lithium (li - ION) manually select， selected after 5 seconds， when the state of charge. when the system is charged， the type of the battery and can\'t change other functions according to the button selection
table 4 led display background
HTB1mSxwJpXXXXbiXFXXq6xXFXXXR
 
 
electrical technical parameters:
1 wattage: usb， dc 5 / 1a micro
2 output voltage: 5 to 1% / 4.2 in
3 the output power: 500ma / 1000ma
4 the constant voltage charges. well that\'s okay， how the end of power: < 100 m;
5 external current in standby mode: < 15.0 m;
usb output functions:
1 usb port output voltage without load 4.90-5.30 in;
2 output power: 1000 meters;
3， the load power: < 1 m;
four 1000 m current port output voltage: 4.75-5.25 in;
5 to stop the output voltage: 3 + 0.1 in.
compatible battery
li ion / dci: 18650， 18490， 18350， 17670， 17500， 16340 (rcr123 14500， 10440)
the charger device size: 113 mm * 38 mm * 20 mm (length / width / height)
becca: * * (without batteries， cable queries)
';