100% ActiSafety Brand 2017 New 4E 5.5" Head Up Display HUD OBD II EOBD Windshield Projector Self-adaptive Car Fuel etc Parameter Display Speeding Warning

buyers show:

2017 New 4E Advantage:
1. Support car model : OBDII and EOBD car model with Car automatic diagnosis system (it can Automatic Matching models)

2. Add time,Gear prompt,water temperature figure independent display.

5. It have a manual power switch, when you dont use HUD ,it can completely cut off the power supply.

6. Add reflective bracket, driving much more security.

4. Dual power supply design ,it can eliminate the influence of car ECU and the central lock when it is standby , when it is standby ,the current is smaller,more stable

3. 2 years warranty, so you dont worry it

Note !!!!!!!!!!!!!!!!!!: This item is compatible with European / American cars manufactured after 2003 or Asian cars manufactured later 2007,

Simulation Test Results:

Main Features:
1. Calls and massages: icon will be bright when call and massage.
2. Mile per hour, kelio meter per hour: unit of speed.
3. Data 1: current speed.
4. Data interface: communicate with the vehicle.
5. Speed alarm; alarming when overdriving.
6. Bluetooth,voltage,rest engine failure ,sound: prompted icon.
7. Engine speed current engine speed.
8. Coolant:coolant temperature.
9. Light sensor:auto induced brightness.
10. Gear prompt: suggested what gear did you change.
11. Data 2: corresponds to the following icon value.
12. Dial button: go into the settings.
13. Engine speed ,air pressure,coolant ,time, voltage: function icons.
14. Ignition angle,acceleration:functions icons.
15. Throttle, fule: function icons.
16. Data 3:corresponds to the following icon value.

ead up display,head up display,head up display,head up display,head up display,head up display,head up display,head up display,head up display,head up display,head up display,head up display,head up display,head up display,head up display,head up display,head up display,head up display,

Reminding :

1. This HUD HEADUP is only support the cars in OBD 2 standard.

2. If you still can not sure whether your car is OBD 2 or not, pls contact us before you buying

Pls let us know which colors what you for display,if not we will send you random , thanks

Description:
Our multifunctional HUD product is developed based on OBD II interface and has good cost-performance ratio. It is designed by adopting the latest integrated circuit with stable performance and has a beautiful and elegant appearance. The installation and adjustment examination can be finished within 3 minutes by using an easier and safer method.

4E Head Up Display for the parameters of the corresponding position:

This HUD only compatible with universal OBD II and EOBD interface, but incompatible with OBD I or JOBD.

Actually, OBD II and EOBD first applied to European and North American manufactured automobiles after 2003, and for Asian manufactured cars, they have even appeared later, since 2007. Besides, some cars, like Hummer and Savana, have special interface, may not compatible with this product, and we suggest Q7.

Note:

For the Same Brand Produced in different countries maybe with OBDI or OBDII, Buyer can contact your Car shop to confirm the port must with OBDII before ordering. Thanks

Now we listing some cars Can\'t Use for this Head up Display, And hope you can recheck your car if it is with OBDII or EU-OBD before ordering. Thanks.

Note:

If you find out that HUD displays only voltage for 30 seconds and then turn off automatically, this is because the interface isn’t OBD II or EOBD. So we suggest checking twice whether your interface is OBD2/EOBD or not before purchase. For old cars, you should set your start voltage at 12.8V, for your battery is too old to provide 13.2V voltage. The speed this HUD displays is 5km faster than actual speed by factory default. You can fine tune or adjust it to your personal preference.

1. Automatically adapt to the automobile models with OBD II (Bus Automatic Diagnostic System) interface. Check if it has the automobile diagnostic socket under the steering wheel.
2. Identify the car\\\'s 16-pin diagnostic socket, connecting the OBD II cable to the 16-pin diagnostic socket if it has this socket.
3. Put the non-slip pad onto the instrument pane, then put HUD on the non-slip pad, you can adjust the angle an position.
4. The reflective film may be affixed to the forward position of HUD and stick to the front windshield, ensuring that the information, such as car speed can be projected to the reflective film.

Package Contents:

1 x Head Up Display,

1 x English Manual,

1 x OBD II Cable,

1 x Anti-skid Mat,

1 x Reflective Film

1 x Bracket

HUD Bracket:

hud,hud,hud,hud,hud,hud,hud,hud,hud,hud,hud,hud,hud,hud,hud,hud,hud,hud,hud,hud,hud,hud,hud,hud,hud,hud,hud,hud,hud,hud,hud,hud,hud,hud,hud,hud,hud,hud,hud,hud,hud,hud,

Head Up Display is designed for preventing accident, which can project important information (e.g. vehicle speed) onto the front windshield at the eye level of the driver.

Besides, the display location and brightness can be adjusted through automatic induction, which can prevent the driver from looking down at the instrument panel and shorten the time of eyes for the blind spot in front.

This can avoid breaking rules and regulations due to speeding in many speed-limited sections. What\\\'s more important, it can enable the driver to read the number instantly without shifting horizon, which is of vital value in reducing traffic accidents caused by absent-mind due to looking down.

Guess You Like: