Features:

1. Ultra thin design， compact and portable， without increasing additional weight of the mobile.

2. Easy to assemble and disassemble ~ only 3 steps:

    Take off the back cover ~ plug in the micro usb head ~ put on the back cover.

3. Energy card can be attached at the phone all the time without removing it frequently

    and would not interrupt the normal use.

4. This receiver needs to work with Qi wireless charging pad (not included).

     It is only can be used with Qi standard charging pad.

5. WPC for Qi compliant wireless receiver special design for mobiles using the micro usb head.

      This is the most efficient way for device to become wireless power ready.

6. Minimal impact on cost without needing to purchase external wireless power accessories or integrated

     modules into the device.



Specifications:

1. Type of interface: Wide interface down

    (Please make sure the interface of your cellphone is wide interface down

     before purchasing our product， otherwise the receiver won't work.)

2. Charging type: battery (one-to-one charging )

3. Charging frequency: 100-200KHz

4. Power distance: 5mm

5. Input: 5V-2A

6. Output: 1000mA

7. AC / for DC adapter input: 100-240v 50/60Hz

8. Color: Black

9. Dimensions: As shown in the picture


Instructions:

1. Plug in the micro USB of the phone， then place the coli above the battery and close the back cover;

2. Make sure that your mobile is using charge cable with mirco USB head and it is located at the centre of the mobile;

3. Rechargeable machines with for QI flag placed in the charging area;

4. Place it  to the charging area after charging.

5. If no charging occurs; adjust the position to be charged.


 

Package include
 

1x Wireless Charging Receiver (Accessory only， charging pad and cellphone are not included.）