Description: DC 24V Micro Reducer Gear Motor Brushless DC Motor Specification: Rated Voltage: DC24V Rated Current: 0.5A (Max) Rated Speed: 330!#!amp!*!plusmn;10%rpm The Outside Shaft Length: 13.5mm Dia. of Shaft: \u222e4 D3.5mm Holzer drive inside with 5 lines.
1. Standard Operating Condictions NO. Item Specification Test method 1.1 Rated Voltage DC24V Multimeter 1.2 Gear Ratio 1\/35 1.3 Rotation CCW!#!amp!*!amp;CW Handle 1.4 Motor Position All position in horizontal Handle 1.5 Temperature 0 Degree - 30 Degree Celsius Thermometer 1.6 Humidity 30% ~ 95% Hygroscope 2. Performance of Motors NO. Item Specification Test Method 2.1 No-load Speed 12000!#!amp!*!plusmn;10%rpm Flash Speed Indicator 2.2 No-load Current 400mA(Max) DC Power Supply 3. Performance of Gear Motors NO. Item Specification Test Method 3.1 Output Speed 350!#!amp!*!plusmn;10%rpm Flash Speed Indicator 3.2 No-load Current 400mA(Max) DC Power Supply 3.3 Stall Torque 12Kg.cm Torque Measure 3.4 Rated Torque 2Kg.cm Torque Measure 3.5 Rated Current 0.5A(Max) DC Power Supply 3.6 Rated Speed 330!#!amp!*!plusmn;10%rpm Flash Speed Indicator 3.7 Noise 52dB Digital Sound Level Meter 4. The Dimension NO. Item Specification Test Method 4.1 The Outside Shaft Length 13.5mm Vernier Calipers 4.2 Shaft End Play 0.05-0.50mm Frock 4.3 Screw Size M2.0 Frock 4.4 Dia. of Shaft \u222e4 D3.5mm Vernier Calipers 4.5 Outline Mounting Dimension Refer to the Outline Drawing



\u4e00: Motor Termations
NO. Signal I\/O Specifications Note 1 Vm (red wire) I\/N DC 12VM !#!amp!*!plusmn;10%V Power 2 FG (green wire) VOH OUT 6.0V Max Hall Signal Pulse Outputs VOL