Tips:
1. The laminator should be placed in a dry， clean place， not near the outlet of the cooling device.
2. Place the debris on the casing is prohibited， to avoid accidents.
3. Do not touch the chassis cover work to avoid burns.
4. care card membrane sandwiched blocked products， be sure to be smooth， with a total thickness of not greater than 0.6mm.
5. Do not use the machine easy soft plastic (such as polyethylene)， easy to stick， too thin plastic material， in order to avoid damage to the machine.
6. Do not choose the market is thin and easily curled plastic film (laminating film thickness is preferably between 80mic-125mic). So as not to affect the plastic effect.
Please do not seal one end of the plastic film is fed into the plastic mouth 7. plastic， so prone to wrinkles or film wound on a roller， until the damage to the machine.
8. Cots Ruoyin when aging causes hardening or cracking， it will affect the quality of plastic (such as a plastic is not strong， etc.)， the need for timely replacement of rollers.
9. The machine is limited to the interior (dry conditions) used Laminator working temperature requirements 5 ℃ -40 ℃， relative humidity less than 80%. Please operate in strict accordance with specifications， so as not to inconvenience. (For more details see annex instructions)