• 100% Brand  New.

  • Weight:2000g

  • Rotation Up to  30，000 RPM

  • Easy to use  dialing speed control

  • Forward and  reverse operation switch

  • Improved  Version : Quiet and smooth - very low vibration version for comfort grip

  • Improved hand  piece cable ending design so that the cable will not loose out easily

  • Improved hand  piece holding area to prevent overheating during a long period of usage.

  • Optional Foot  pedal for easy operation and comfort

  • Optional Foot  pedal for easy operation and comfort

  • Use for both  pedicure and manicure

  • The nail file  can be used for natural as well as artificial nails

  • For  professional studio use or home use

  • Voltage:  110V~120V，US Plug; 220-240V，EU Plug

  • If you use in  110V~120V countries like  e.g. U.S. / Canada/ etc， Please choose  110V~120V(US Plug)standard  for you

  • If you use in  220V~240V countries like  e.g. United Kingdom /  Australia / All European Countries / etc，  Please choose  220V~240V(EU Plug) standard  for you

 Operation  Detail:

  • Plug in the  electric cord of the transformer to the main electric outlet

  • Turn on the  on/off switch on the transformer. (machine should be at the lowest speed  when turning on)

  • Select the  desired speed by turning the variable speed control knob on the transformer

  • The black  switch in front of the transformer， next to the speed control selection knob  is for forward and reverse rotation direction

  • To use the  foot pedal control， connect the end of the cord from the foot pedal to the  out put hole at the front of the transformer and press down on the foot  pedal

  • To secure the  bits: push in the desired bit firmly into the hole at the rotating head of  the hand piece until the second lock click. (please note the bit has to pass  through)

  • To remove the  bits: turn off the machine and gently pull the bit out.

Safety rules:

  • Always unplug  the tool when you change accessory or collets

  • Do not engage  the shaft lock button while the tool is running

  • Do not use  near or place in water. if motor falls into water， unplug immediately. do  not reach into water

  • Do not touch  the bit after use. The bit is too hot to be touched by bare hands

  • Keep dust out  of eyes and lungs by using protective eyewear or a dust mask

  • Always unplug  it after use

  • When the  machine is not in use， all tool must be stored in a dry location abd keep  out of reach of children.

 

 

 

 

 

  • 1 x  Electric Nail Drill Machine : Main control + Handpiece

  • 1 x  Table Stand for handpiece

  • 1 x  Foot Pedal Power Control

  • 30 x  Electric Nail File Drill Bits (With 3/32" (2.35mm) shank size)

  • 6 x  Optional Bits / Filing Heads (includes 1pc of emery rod with 4  sanding bands)

  • 50  pieces of Sanding Bands with degree 80"

  • 50  pieces of Sanding Bands with degree 100"

  • 50  pieces of Sanding Bands with degree 120"