PRODUCT NAME
AntMiner Antminer S9 ~13.5TH/s @ .098W/GH 16nm ASIC Bitcoin Miner
PRODUCT CODE: PROD1830127426
PRODUCT INFORMATION
Hash Rate: 13.5TH/s ±7%
Power Consumption: 1323W ±7% (Power supply not included).
Most Power Efficient Miner in Existence: 0.098 J/GH ±7%
Power supply sold separately. AntMiner APW3 or AntMiner APW5 recommended.
Built-in web management portal. No separate host computer required.
Technical Details
Product Details
Product Dimensions
Package Dimensions
Width : 10.39 inch
Height : 8.82 inch
Length : 17.6 inch
Item Weight: 0 ounce (View shipping rates and policies)
Shipping Weight: 10.25 pounds (View shipping rates and policies)
ASIN : B01MCZVPFE
Product Description
AntMiner S9 Specifications:
1. Hash Rate: 13.5 TH/s ±7%
2. Power Consumption: 1323W ±10% (at the wall, with APW3, 93% efficiency, 25C ambient temp)
3. Power Efficiency: 0.098 W/GH ±7%(at the wall, with APW3, 93% efficiency, 25°C ambient temp)
4. Rated Voltage: 11.60 ~13.00V
5. ASIC Chip: BM1387
6. Dimensions: 350mm(L)*135mm(W)*158mm(H)
7. Cooling: 2x 12038 fans
8. Operating Temperature: 0 °C to 40 °C
9. Network Connection: Ethernet
10. Default Frequency: 600M
Please note the following:
1. Due to the nature of these products, there are higher than normal restocking fees (typically 20-40%). The restocking fees are typically waived in the event that there is a provable failure within the first 30 days. In the event that you experience a failure, please reach out to the seller immediately so that we can begin troubleshooting with you and/or processing a return.
2. Each AntMiner S9 requires TEN 6-pin PCI-e connectors for 12V DC input (must be very stable power source) There are three hash boards that require three 6-pin PCI-e connectors each and one additional 6-pin PCI-e connector on the controller. All TEN 6-pin PCI-e connectors are required. Do not connect more than one PSU to the same hash board to prevent possible damage and instability.
3. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.
4. Power supply unit is not included. Bitmain recommends the APW3 or the APW5 power supply for the AntMiner S9.