The E10 is a compact, two-way loudspeaker with a 10-inch, die cast frame woofer with a 2.5-inch voice-coil housed in a multi-purpose enclosure that’s at home in stage monitor or main PA deployment. It incorporates QSC’s DMT (Directivity Matched Transition) design with a wide 85° coverage. When used as a stage monitor, the E10 is angled up at a 55° angle allowing it to be placed near the performer when used on a crowded stage.
E Series loudspeakers will perform very well with any quality, professional power amplifier – but by taking advantage of the complete E Series Entertainment System, more performance and options are available. Today’s powered loudspeakers rely on finely tuned digital signal processing (DSP) to achieve a higher level of performance. When used with QSC GXD or PLD amplifiers or with a QSC TouchMix digital mixer, E Series loudspeakers can also take advantage of advanced DSP. QSC has developed E Series DSP settings for all three platforms. These settings support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke.
FEATURES
- High output, professional quality sound with 300 W continuous power
- E Series Entertainment System – Advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers.
- E Series Entertainment System DSP Tunings are now available for PLD, CXD and GXD processing amplifiers:
- For PLD/CXD visit Amplifier Navigator Software
- For GXD visit the GXD Firmware Updater
- Rugged tour-grade textured paint
- Foam-lined perforated steel grill
- Suitable for main PA and stage monitor
- Available U-Style Yoke and M8 rigging kit for permanent installation
- Dual angle pole socket
SPECIFICATIONS
|
Model |
E10 |
|
Configuration |
1 x 10-inch, 2-way, non-powered |
|
Frequency Response (-6 dB) |
68Hz – 20kHz |
|
Frequency Range (-10 dB) |
50Hz - 20kHz |
|
Power capacity²: continuous/peak |
300 W / 1200 W |
|
Sensitivity |
95 dB, 1 W @ 1 m |
|
Coverage Angle |
85° conical DMT |
|
Output1 (Peak SPL @ 1m) |
126 dB |
|
Drivers LF HF |
254 mm (10-inch) driver with 64 mm (2.5-inch) voice coil; 25 mm (1-inch) exit, 45 mm (1.75-inch) voice coil, compression driver |
|
Nominal Impedance |
8Ω |
|
Cross-over |
Full-range only, 1.8 kHz |
|
Input Connections |
2 x NL4, 1 x barrier strip |
|
Enclosure |
Multi-angle plywood, black texture paint finish. One top-mounted handle. Perforated, powder-coated steel grille with foam lining. |
|
Mounting and suspension |
6 x M8 suspension points, dual angle, 35 mm pole-socket |
|
Net weight |
20kg / 44lbs |
|
Shipping weight |
23kg / 50lbs |
|
Dimensions |
330 x 560 x 330 mm 13 x 22 x 13 in |
|
|
|