Form is beautiful

Although it was a half-year use impression, I slipped a little when I used Z3 naked, but I think that this is the fate of the glass film. Since it slides considerably, after that it is good to buy a notebook type case and use it but it will not get in the way of the case. It is good as it is inserted normally in the cradle. It is pretty beautiful that the edges are rounded.

Difference between previous improved version and this refinement version

The difference between the previous improved version (order receipt end?) And this refinement version is different, but the hole of the proximity sensor on the upper right became a little big. In my case there was no problem with the improved version, but it may have taken more safety margin against malfunction of the proximity sensor. The hole remains smaller than DOLFHIN 47. ● Comparison of the size of the proximity sensor hole Previous Improvement Version

This product may be evaluated more ...

Rusta Banana Xperia X Compact (SO - 02J) notebook case Impact absorption + COLOR (red × navy) 2815XPXC was attached and this glass film was used but it is just fit. It does not interfere with the case perfectly. Since it is processed round-edged, the appearance of the smartphone is kept almost as it is and the surface is beautiful. Although it is a product affixed only around the film, this product with color on the edge will not be bothered at all because it will also hide the appearance of bubbles and the like. However, it is better to carefully prepare the dust intruding into the liquid crystal screen at the time of wearing, then prepare a cellophane tape etc. for dust removal and then paste the work. Also, as it is pasted just around the periphery, fine adjustment of the position is also possible.

Fingerprints are ...

There is no problem in transparency and operation feeling at all. However, there were several things like fingerprints on the affixing surface, and I could not get pasted properly. After a few days, bubbles escaped by pressing, but fingerprints remained. I was supposed to do the exchange, but I am worrying about the scratch while there is no protective seal, I am intimidating and using it.

Ah-oh ...

The glass film itself was good, but when it was stuck it looked black, but it looks bubble but bubble wraps sounded. When I bought it on December 25 and the mobile phone fell from my pocket on January 6, the film flew away.

Heavy thick but strong

Thickness is 0.3 mm and does not enter the standard cradle, you can use the cradle with the attached larger adapter at the time of purchasing the main unit. Reapplication is also a little hard but it is possible, of course apparently very transparent and very strong. It seems that it can be used without worry of scratches. 2015.1.9 Additional notes The glass film on the back of the main body is not processed round. So it hurts very much when I have the main body. I can no longer recommend the back side at all (1 star reduction). However, the front is very nice and recommended. Also, as it got cracked when it dropped it may hurt, and now I use it without attaching anything to the back, but now neither scratches are attached at all. Originally seems to be strong.

Overseas Version Xperia X (F5122) OK

I used it in overseas version SIM free machine Xperia X (F5122). Because it is clumsy so I always asked you to paste it at a certain home electronics retailer's affixing service, but a clerk said that "compatibility patchy", as stated in the photo, pasted without a sensor and speaker slippage I did it. The circumference round part which was a matter of concern (there is no problem) at present. The glass film of Xperia X / X Performance is hard to paste and it is said that there are many things that the compatibility is not good (sensors are displaced, the ends are floating, etc.), but this product does not have such a thing, there is no problem in use Looks likely. · As a feeling of use it is equivalent to ordinary glass film. · Since the upper and lower frames are filled all over, you can not see each logo. There is a frame about 2 mm to the left and right, but it does not matter. We will continue to observe durability.

Very satisfied

It was advised to protect film of regular price ¥ 6,000. (There was no product of other price range) at Dosho shop, but I found this item and bought it. Although it was uneasy whether it could be adhered neatly, a cleaning kit for removing dust was also attached, and explanation was able to be stuck easily with polite. Operation after installation was also smooth and completely no problem. I thought that I would like to select this item next time. P.S. When sticking the protective film, it is recommended that the hole of the "proximity sensor" (top, most right side) be closely aligned and pasted than the hole of the lower speaker or the earpiece of the upper part. It seems that if there is a slight deviation here, there will be a problem when sending and receiving calls. Be careful.