Notes:
- All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only.
- Photo attached is for reference only, it may be slightly varied in items of colour, shape from the actual item delivered from time to time.

A01:Arduino Compatible Uno R3  Development Board
(Dccduino Board)
The DCcduino Uno is a micro-controller board based on the ATmega328 and compatible with the Arduino Uno R3.
It has 14 digital I/O pins, 6 analog inputs, a 16MHz crystal oscillator,
a USB connection, a power jack, an ICSP header, and a reset button.
It contains everything needed to support the micro-controller;
simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.

The DCcduino Uno has all the same major connectors as the Arduino Uno R3
and should be compatible with the same Arduino shields.
Additionally, there are several extra sets of header connectors – some of which
provide extra signals that are not easily accessible on the original board.

The DCcduino Uno is a popular Arduino Uno R3 pin and feature compatible clone with a few differences.
The board comes with extra pads next to the standard headers so you can add yourself a second row of female headers and it also includes 12 pads not available on the standard Arduino Uno that allow you to solder in headers giving you extra RX/TX, SCL/SDA, 3.3v/5v, and GND locations which are really useful if you’re using a lot of pins.

Most of these newer Arduino clones including this one use a USB CH340 Serial Converter instead of the Uno standard Atmega16U2 chip or FTDI chips which were a very popular chip up until recently when FTDI updated their drivers to combat counterfeit chips by basically bricking them when you applied the update.

The now more popular CH340 chips work great and the drivers are included in Windows 8+ and Linux by default, unfortunately that means if you’re running Windows 7 or Mac OS X you going to have to do a little bit of extra work to install the CH340 drivers and get these going. we will show you how to install the DCcduino Uno driver to make your computer recognize your device over USB.

For Windows 7

Download the drivers from Here
Unzip the folder.
Navigate to the CH341SER folder and run the setup.exe to install.

Note: This version can not compatible with MAC computer.