Micro RC Mi-RX32M Micro 2.4G 4Channel Universal DSM2 Protocol Receiver




Simple Introduction:
The MI-Rx32M is a DSM2 Compatible 4 channel micro receiver for actuators. It's very light and you have the option of soldering direct to the board or soldering 1.27mm pitch connectors to make the unit easily plug n play. The receiver has a 2 Amp onboard brushed ESC as well as a signal pad for use with an external brushless ESC board.

Description:
Brand: Micro RC
Onboard ESC: Brushed
ESC Rating: 2 Amps
Length: 15.2mm
Width: 11.8mm
Height: 1.6mm
Voltage: 3.3 - 4.2v
Weight: 0.35 grams
Motor wire Lenth: 0.35mm
Maximum actuator circuit load: 400ma
Actuator driving frequency: 7.8kHz
Compatibility: DSM2
Compacity:compatible with all DSM2 transmitter or DSM2 radio adapter

Generally this DSM2 could support all JR and Spektrum transmitter.
It also could support WALKERA DEVO 10 and DEVO 7E with deviation firmware.
And it could support all transmitter which has DSM2 protocol.


Features:
- you can only set it up for 3 channels in either of the configurations below.
1. Throttle， Elevator and Rudder
2. Throttle， Elevator and Aileron
- The rudder and aileron can be swapped by programming
- The unit can also be programmed for V-Tail mixing on the elevator and rudder \/ aileron channels. Plese see the instruction manal for details.

Package Included:
1 x Origin RC Mi-RX32M 2.4G 4Channel Receiver