Package Including:

1 x 20mm coiler

1 x 25mm coiler

1 x 30mm coiler

1 x 35mm coiler

4 x wrapping tool

1 x Screwdriver  

1 x Gift Box

 

Kuro Koiler/Coil Jig Specifications:

Model:Kuro Coiler/Coil jig

 

Material: SS

 

Type: CW-20/CW-25/CW-30 

 

Diameter: 2mm/2.5mm/3mm/3.5mm

 

Net Weight: 80g

 

Fit for :RDA、RBA & RTA DIY atomizer 

 

Color available: Red、blue、purple etc

 

Weight per set: about 100g

 

 

Jomo Atomizer Coil Jig Features:

1.Revolutionary Patent Pending Micro Coiling Technology、 making coils now is a breeze

 

2.Simply trap your wire、 rotate the top cap、 and you get that perfect micro coil in seconds、 each and every time!

 

3.Light weight and portable、 perfect for traveling、 and on the go!

 

4.Unique styling with stylish colors、 each color represent different coil size

 

5.CW-20 makes 2mm coils、 CW-25 for 2.5mm coils、 CW-30 for 3mm Coils、 CW-35 for 3.5mm

 

6.By far the most innovative and revolutionary products of the year!

 

JomoTech Kuro Koiler Coil Jig Instructions:

 

 

1.Insert the socket screw into the appropriate hole of the winder section

   a.For 26 - 28 gauge wire、use hole number 1

   b. For 20 - 24 gauge wire、 use hole number 2

 

2.Insert wire through hole on the side of the handle. Leave about 1/2" of the wire protruding from the hole. Hold the end of the wire against the handle so it won\'t pull through.

 

3.Pull the loose end of the wire around the shaft

 

4.Slide the winder section over the shaft with the pin facing toward the handle

 

5.Turn the winder section so that it catches the wire and starts wrapping it around the shaft. Keep light pressure against handle while winding. Excessive pressure will force smaller gauge wire to wrap over itself;  When finished、 remove winder and straighten the wire end that protrudes from the hole in the handle.

 

6.Push up on the wire to slide coil up. Carefully grab the coil at the bottom to slide it off the shaft