Easily upgrade the PlayStation®4's hard-drive space up to 8TB*. The Data Bank for PlayStation®4 allows the use of a 3.5'' hard drive to be used as internal storage instead of the stock 2.5'' hard drive that comes pre-installed on the system. 3.5" drives are less expensive at higher capacities than the 2.5" drive inherently supported by the PS4™. Typically 3.5" hard drives have a higher read/write speed than 2.5" hard drives, which may slightly improve load times in many games. The Data Bank also features a front facing LED indicator which illustrates when the PlayStation®4 is accessing or saving content on the hard drive. The Data Bank is powered by a built-in power pass-through cord so it does not require its own power outlet.

Installing the Data Bank is easy and takes only a few minutes. After backing up your saved data, simply remove the top cover of the PS4™ and take out the internal 2.5" hard drive by removing one screw via the included screw driver. Slide the included Universal Cartridge into place, fasten it down with the screw and then snap the Data Bank onto the top of the PS4™. Once installed, place a SATA 3 3.5" hard drive into the Data Bank and attach the cover. The last step is to plug the power pass-through cord into the PS4™ and then plug the PS4™ power cord into the pass-through cord. Detailed instructions on how to back up and transfer PS4™ save files, Data Bank installation and how to initialize the PS4™ firmware on a new drive are included in the box. You can download the latest version of the PS4™ firmwareHERE. 

With the Data Bank installed, the storage capacity of the PS4™ can be expanded up to 8TB*, drastically increasing the amount of games and save files that can be stored on the system. 

• Easily upgrade the storage capacity of the PS4™ up to 8TB*
• Uses any SATA 3 3.5'' hard drive instead of more expensive, slower 2.5" drives
• Save money and get more storage with a 3.5" hard drive over 2.5" drives
• The faster read/write speed of 3.5" hard drive may improve load times of most games
• LED indicators illustrate when the PS4™ is saving content or accessing the hard drive.
• Power pass-through cord utilizes the standard PS4™ power cord to power the hard drive - Does not require its own power outlet
• Modular - Compatible with other Nyko modular items for PS4™

*With the 3.50 firmware update for PS4™ we recommend up to 4TB for models below CUH-1200 and for models above CUH-1200, we recommend up to 8TB.

*3.5" hard drive not included.

Note: You must be running PlayStation®4 firmware 3.50 or higher to use above mentioned hard drive sizes.

The Intercooler is the best way to guard against cramped, poorly ventilated entertainment setups. The Intercooler pulls hot air out and away from the system, keeping the console cooler while increasing air flow in tight spaces. Powered by a patented power pass-through cable, the built-in temperature sensing technology ensures the unit will turn on and off automatically without any prompting from the user. While attached, the Intercooler still allows access to all important ports on the console. The Intercooler is the ideal attachment to help protect your investment.

• Dramatically increases airflow out and away from the system
• Temperature sensing technology automatically turns the Intercooler on and off when it is needed
• Powered by a pass-through power cable that does not require its own power outlet
• Allows full access to all ports on the the back of the console
• Matches the décor of the PlayStation®4 console

Conveniently store and charge two DUALSHOCK®4 controllers with Nyko’s Charge Base for PlayStation®4. The Charge Base for PlayStation®4 comes with 2 custom USB Charge Adapters that attach to the Micro-USB port on the controller, leaving the ergonomics and grip of the PlayStation®4 controller unchanged. The patented adapters allow for easy drop and charge design, no cords, wires or plugs needed. The dual port recharging dock is AC powered, and plugs into any standard outlet, requiring no cables back to the console. The low-profile design allows for the Charge Base to fit easily in entertainment centers while the LED charge indicators keep you notified of the charging status.

• Drop and Charge design allows for charging without cables
• Includes two USB Charge Adapters for quick and convenient use
• Dual port recharging dock charges both controllers simultaneously
• LED lights clearly indicate when charging is complete
• Plugs into any wall outlet for rapid recharging 

An easier way to charge PlayStation®4 DUALSHOCK®4 controllers. The Modular Charge Station attaches to the top of the PlayStation®4 console and features two patented Micro-USB dongles for easy drop and charge functionality. The Modular Charge Station is powered by the front two USB ports on the console and contains a pass-through to preserve their functionality. The sleek design of the Modular Charge Station saves space and conforms to the PS4's decor.

• Charge 2 DUALSHOCK®4 controllers simultaneously
• Utilizes Nyko's patented Micro-USB dongle system for convenient, drop and charge functionality
• Unique modular design attaches to the top of the console and sticks with the sleek design of the PS4™
• Utilizes both front USB ports for power, no AC cord or wall outlet needed
• USB 3.0 provides a quick charge
• Pass-through port preserves functionality of the USB ports*
• Seamlessly matches the design and form factor of the PS4™
• Compatible with other Modular items from Nyko

 If you need adapters for Modular Charge Station for PS4, please click HERE.

*Please note, earlier models of the Modular Charge Station do not contain the USB pass-through port. Modular Charge Stations containing the USB pass-through will indicate on the package.