Remote Control Distance: 100 meteropen/ideal in theory, 10%-50% in realityIn open environment
Encode: Fixed code, soldering
Frequency: 315 or 433mHZ
Channel: 4 CH
Power Supply: DC 12V
Relay: DC 12V
Quiescent Current: 8mA
Work Voltage Range of Relay: AC 110-240V or DC 0-28V
Sensitivity:-105 dBm
Operating Temperature:-40 ~80
Receiver Size: 68x47x17mm
Control Mode:
1. Toggle/Self-Lock: Press->On; Press again->Off
press one button for one time is working/ON .press the same button again is stop/OFF .1 channel switchreceiver need 1 button remote control transmitter.
2. Latched/Inter-Lock: Press->On; Press other button->Off
press one button is working/ON ,press another button is stop/OFF . 1 channel switch receiver need 2 buttons remote control transmitter.
3. Momentary/Jog: Press and hold->On; Release->Off
Keep pressing one button is working /ON. loosen your finger is stop/OFF .1 channel switchreceiver need 1 button remote control transmitter
Learn code and Remove Code:
1.Learn:Press the learning code . The indicator'on' to 'off' , loosen your finger, press any button of the remote control ,the indicator flash 2 times and off .it mean you learn it successfully .it can learn more than 12 PCS 2260/2262 chip with the different code wireless remote control.
2.Remove :press the learning button about 8 seconds , the indicator turn on to off , it means the Code had been removed successfully.
Package Include:
1 X Receiver
2 X Transmitter Battery include
Note:
1.Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid.
2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!




