Carrier/Backing: UHMW (Ultra High Molecular Weight) polyethylene film. Adhesive: acrylic.
Thickness: 11 mils (carrier, adhesive, liner) 7 mils (carrier, adhesive) 2 mils (adhesive) 5 mils (carrier) 4 mils (liner). Elongation: 300%.
Adhesion: 60 ounces per inch (to stainless steel test panel). Tensile Strength: 30 pounds per inch (longitudinal).
Service/Operating Temperature: up to 300F
Certifications: Chrysler MS-CH612, Ford ESB-M3G123-B, GM 6419M

Technical Details

Product Details

Product Dimensions

Package Dimensions
Width : 5.7 inch
Height : 0.8 inch
Length : 5.8 inch

Item Weight: 0 ounce (View shipping rates and policies)
Shipping Weight: 0 ounce (View shipping rates and policies)

ASIN : B00XK9V9ZS

Product Description

JVCC UHMW-PE-5 UHMW Polyethylene Film Tape is a 5 mil ultra high molecular weight polyethylene film with an aggressive acrylic adhesive. Its high chemical and abrasion resistance and extremely low coefficient of friction makes this a versatile engineering material for many severe service applications. Materials slide freely over tape surface with no slip/stick tendency. High impact strength and shock absorbing properties. Outwears Teflon many times and is a good replacement when high temperature resistance is not a requirement. Applications include: rub strips on conveyors; bearings and sliding surfaces; chutes and hopper liners; dead plates; wear pads; guide rails; tool tables and fences; furniture and drawer slides/runners. UHMW polyethylene tape is used primarily in automotive and mechanical applications. Meets automotive specs: Chrysler MS-CH612, Ford ESB-M3G123-B, GM 6419M. Wound on a white paper liner.
Image does not show a full 36 yard roll. If not otherwise specified widths shown in dropdown are in inches. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product''s actual size is 12.5mm wide. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores.
Technical InformationCore: 3 inch diameter plastic
Backing/Carrier: UHMW (Ultra High Molecular Weight) polyethylene film
Adhesive: acrylic
Release Liner: white paper
Certifications: Chrysler MS-CH612, Ford ESB-M3G123-B, GM 6419M
Thickness: 11 mils (carrier, adhesive, liner) 7 mils (carrier, adhesive) 2 mils (adhesive)
Adhesion: 60 ounces per inch (to stainless steel test panel)
Tensile Strength: 30 pounds per inch (longitudinal)
Service/Operating Temperature: up to 300F
Elongation: 300 %