This double automatic inflatable cushion, in strict accordance with international class a standard production, using the high rebound sponge, sizing, prevent rupture, more smooth, longer service life. Automatic inflation more convenient.

Reminder: if you want to make the air slightly thick, can be slightly blowing gas, that will be a little plump (note, not inflation too full, too full to bursting charge)

Description

1, the first use of:

1) open air cushion  

2) open the gas nozzle, the air cushion bed automatic expansion. Close the gas nozzle, the air cushion bed repeatedly folded in half, and then pull a few, then open the valve, let the air cushion bed automatic expansion, which fully restore elasticity and shape.

2, inflation method:

1) open air, open the gas nozzle, air cushion bed will automatically start the expansion.

2) please wait until the air cushion bed expansion is completed, and then tighten the valve cover.

3) adjust the air pressure, adjust its comfortable hardness.

Note: if kept in rolled condition for a long time (not recommended), please several blowing expansion restore elasticity of export.

3, Methods exhaust:

1) open the gas nozzle, rolled up from the other end of the gas nozzle, pressure air.

2) close the gas nozzle, the other end up by air cushion bed, open the gas nozzle again to discharge the residual air.

3) the final closure of the valve, can be rolled state is saved at any time.

Note: please put outsourcing carrying bag, avoid scratching.

4, the storage method:

Open air, open the gas nozzle, stored in a cool dry place (example: on the back of the bed or sofa), because the air cushion bed sponge shape memory, can quickly expand into the most commonly used shape.

5, repair method:

1) confirmed the leak: blowing close the valve after the expansion, and water or dilute soap water surface wet, folded in half, with the knee down to weight pressure, local is leak blistering, please make a mark.

2) small hole repair: the air cushion bed completely dry, releasing the air, in the hole droplet and then agent. Because the air is discharged, so the agent can be inhaled, the hole is sealed. After then hardens.

3) damage repair: the air cushion bed dry completely discouraged, glue in the repair of cloth, air cushion bed surface hole is coated with glue, allow to dry for 30 seconds to 3 minutes (as high and low temperature dependent), attached to the breakage, applanation, keep 4 hours before use.

6, clean:

The air cushion bed expansion to the maximum limit, to close the valve, defatted family soft brush and low stimulation of detergent or detergent, washing in the bathtub with water thoroughly washed, dried preserved completely.

7, the matters needing attention:

1) not close to a sharp object (plants have thorns or sharp or blade).

2) do not use the tent, please dry cloth in the air cushion bed.

3) do not as a flotation device.

4) away from the flame or spark.

5) air temperature is high, and the expansion will not close the valve air cushion bed on the vehicle or the tent.

6) do not touch sunscreen or alkaline drugs.

7) not long time exposure to sunlight, ultraviolet radiation will make the surface of the material slowly damaged.

8) please put the pet cannot touch.

9) the gas nozzle part is hard, the rest should avoid it.