Model:T80; Mode of Engine:Single cylinder, air-cooling, 2-stroke; Model of Chain:415; Chain Length:110 links, 55 inches
Rated Power: 1.5Kw/5000r/min (2.5HP/5000r/min); Max. Power: 2Kw/6000r/min (5-6HP/6000r/min); Ignition Mode:CDI; Compression Ratio:6: 01
Driving Ratio:18: 01; Fuel type:No.90; Lubrication Oil:Motorcycle Synthetic 2 Stroke Oil; Mixing Ratio for Fuel and Oil:16:1 for break period (first 300 miles) / 25:1 after
Spark Plug:Z4C 14MM; Fuel Consumption:120-170 MPG; Clutch Type:Friction Plate/Dry; Maximum Speed:25-40MPH (depending on the gear ratio and weight)
Package size: 16.5 x 12.5 x 8inch; Package weight: 24.5lb; Horse power: 2.75 HP
This bike engine kit fits most mens'' 24'' and larger bicycles which includes mountain, cruiser, chopper and road bikes with a V-frame and at least a 8.5'' height clearance for the engine. Larger frame size requires drilling into bike frame and use of the universal face plate. Large bikes (with larger frames/down tubes) may require the Universal Motor Mount.
Allows you to travel at 25 to 45 km/h. With this kit you can easily switch between pedaling (bicycle) and engine (scooter) modes- combining two pleasures in one. Amplify your pedaling power, ride farther and faster or simply feel the wind in your hair as you zip along at super-speeds.
Maximum Power: 2.2kW/600r/min; Rated Power: 1.5Kw/5000r/min; Horse power: 2.75 HP. Ignition type: CDI. Engine Type: Single cylinder, air-cooling, 2-stroke; Chain Model: 415 heavy duty chain; Chain Length: 110 links, 55 in.
Transmission Ratio:18:1; Compression Ratio: 6:1; Ignition Mode: CDI. Clutch Type: Friction Plate/Dry; Spark Plug: Z4C 14mm
NOTE: 1. Be assured the mixing ratio of fuel and engine oil is 16:1 for new sets, 20:1(18:1 is much better in summer because of the hot weather) after running 500km. 2. Air cylinder might take some time to adjust to the load. Thus to avoid possible complications for the motor, please limit the riding time to a maximum of 1 hour for the first few rides.

Technical Details

Product Details

Package Dimensions
Width : 17.01 inch
Height : 7.52 inch
Length : 17.01 inch

Shipping Weight: 24.75 pounds (View shipping rates and policies)

ASIN : B0129H75V8

Product Description

Experience the same speed as a motorcycle or scooter, without having to spend a fortune. This kit will professional transform any men''s 24inch/28inch bike to travel at 20-40mph. After you convert your bike, you will be able to experience 100-150 miles per gallon. The iron tank has a capacity of 2 liters of fuel. While you can improve the gas mileage by breaking the carburetor by riding 350miles.
The kit includes all the parts and instructions necessary to convert your bike. It is a bit technical, and will require some time to install, thus professional installation is highly recommended. Please also keep in mind that the motor will use a mix of gasoline and oil. The oil is used as a lubricant. Without it, the performance and longevity of the motor will be reduced. Please refer to the manual for further information including gasoline/oil ratios.
The seller will not be held liable for improper installation or misuse of fuel. This product is not for amateur use. Therefore, by and use at your own risk.
Compatible with: Most 26'' Wheeled Bikes (Mountain, Cruiser, Chopper, Road) with V-frame. The frame should have 9-11'' of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm in diameter.
Package Includes:
1. User manual
2. 80cc 2-stroke EPA certified engine
3. Sprocket clamp assembly with hardware
4. EPA Cat. Converter exhaust muffler with heat shield (silver)
5. Push button clutch
6. Heavy duty chain
7. Bearing chain tensioner / idler
8. Carburetor
9. CD ignition coil
10. Kill switch (on throttle)
11. Chain guard
12. Spark plug
13. 2L black gas tank with mounting brackets
14. Muffler assembly
15. Exhaust pipe clamp
16. Plug removal tool
17. Standard universal mounting bracket