Item Descriptions:

Product introduction

A 7 inch tablet is mounted on a car and can be used like a car navigation vehicle holder.

[Body size]: W98 × D155 × H 122 mm

[Sucker size]: φ80 mm

【Weight】: about 214 g

[Materials]: Main body / PC, ABS resin, suction cup / TPU, protective cushion sponge / EVA, suction cup mounting plate / PC, horizontal adjustment screw / TPU

【Applicable model】: Equipment dimension is width 110 - 170 mm and depth 15 mm or less

【Load carrying weight】: 600 g or less

[Accessories]: Suction cup mounting plate, cushion sponge (2 pieces), horizontal adjustment screw (2 short screws, 2 long screws), instruction manual

From Amazon

In-vehicle holder that can be used like a car navigation system by mounting a 7 inch tablet in a car

This is an in-vehicle holder for tablets that can be fitted with Apple iPad mini and 7 inch Andoroid tablet.

Because it adopts a sticky adhesive gel material suction cup, it can be attached directly to a dashboard with fine irregularities.

※ There are cases where the sucker does not adhere tightly, such as dashboard with coarse surface texture processing.

In that case please use the attached suction cup attachment plate.

It can be firmly fixed with a lever vacuum suction cup.

Depending on the ball joint structure, you can use it at your preferred angle.

Since it comes with a suction cup attachment plate with an adhesive sheet, it can be installed even in places where suction cups can not be installed.

<Usage Precautions>

※ Please do not operate this product and attached equipment while driving a car.

Be sure to stop at a safe place before operating.

* Please do not install in the position which interferes with the driver 's field of view and driving operation, or the position which obstructs movement of the air bag.

* Please do not attach anything other than compatible equipment to this product.

※ Please install firmly on a flat surface.

Also, please do not use it with wobble.

※ Please do not use at an unstable angle.

Please be careful not to pinch the hand etc in the moving part.

* Sanwa Supply shall not be liable for any accident, direct or indirect damage caused by the failure of this product or its use.

Please note.

※ Please do not use for purposes other than.

* Do not disassemble, repair, process, or remodel this product.

※ Do not give strong vibrations or impact / impossible force to this product.

※ Please note that if the product is used for a long time at high temperature, low temperature, high humidity place · leave the adsorption power dropped off.

※ Please do not let children touches this product and accessories.

※ When cleaning this product, please do not use those containing volatile organic solvent such as benzine or thinner.

※ The equipment installed in sunlight may get hot.

Please be careful when using for a long time in the car.

* Please do not leave it in the car while installing the equipment.

* If the material of the dashboard is genuine leather, suede, upholstery etc., please do not install as it may damage the surface finish.

* Dashboard may be deformed by suction power of suction cup.

* Please confirm whether there is no influence on the operation of turn signal lever, shift knob, switch etc when installing.

* Depending on the material and surface finish of the dashboard, the mark of the sucker may remain.

Please understand beforehand, please use.

* When the high temperature / low temperature condition inside the car lasts for a long time, fixation may become weak.

Please make sure that it is fully fixed before use.

※ If you leave this product attached to the dashboard, the dashboard may deform / discolor.

When the dashboard is deformed, the suction force of the suction cup becomes weak and it may fall.

* Depending on the type of vehicle to be installed or direct sunlight, the mounting part of this product may discolor or the mounting trace due to sunburn may remain.

* If the whole sucker is not tightly attached tightly, it may come off during use.

※ Please choose a smooth and level place on the dashboard.

Features:

• Please enter model number Confirm this is compatible:
• - In-vehicle holder that can be used like a car navigation system by mounting a 7-inch tablet in a car.
• A 7 inch tablet is mounted on a car and can be used like a car navigation vehicle holder.
• ● Body size: W 98 × D 155 × H 122 mm
• ● Sucker size: φ80 mm
• ● Weight: Approx 214 g
• ● Material: Main body / PC, ABS plastic suction cup / TPU protection cushion sponge / EVA suction cup mounting plate / PC horizontal adjustment screw / TPU

Product information:

Shipping Weight: 299 g

Package Dimensions: 12.29 x 19.20 x 21.69 cm