The instruction of car camera:

l  Accessories

User manual  USB cable  USB car charger (built-in 12V to 5V adapter) AV cable

v  Function operation

l  Installation 

The car DVR is easy to be installed, only need to firm the device onto the windscreen,connect the USB car charger to the car power, and hide the cables.

l  Charging:

A. Charge the Li-ion battery

   (1) connect the USB car charger

   (2)connect it to computer by USB cable

NOTE: When being charged,the green light is on,and the green will be off when the dvr is fully charged. 

B. Connect to 12V car charger

  When the car starts,the DVR will starts recording automatically, 15seconds after power off,the DVR will be closed automatically,and it will save the recorded files.

Attention: we only can use the car power whose output is 5V, we need to long press the power key and close the DVR after cutting off the power.

l   Recording mode

1．Short press the power key and connect the USB car charger,the DVR will enter the recording mode.( please insert the TF card first). Now,the blue light will flash,the files will be stored into the TF card.

2．When taking off the USB car charger or long press the power key,the DVR will be closed and the blue light will stop flashing.

l   G-sensor

    When the car impacts, the present video files will be saved as a file that is named as EVE beginning, the video file will not be deleted when cycle recording.

l  Emergency lock

    When recording, short press the Lock key to lock the present file,the file will be saved as SOS beginning, the video file will not be deleted when cycle recording.

l  Photo mode

1)      Short press Power key to start DVR and press the Confirm key to stop

recording,

2)      then short press the Mode key to enter the photo taking mode,

3)      press the Confirm key to take photos.

4)       

l  Night vision function

Under the recording and photo taking mode,short press the power key to open or close the

infrared LED.

l  View and delete files

1)      Start the DVR and press the Confirm key to stop recording, short press the Mode key twice to enter the playing back mode;

2)      press the UP key to choose the recorded file and press the Confirm key to play or view files,

3)      press the Menu key to delete mode after playing;

4)      press Down key to choose deleting or formating;

5)      continue pressing Menu key to exit operating.

l  Menu Functions Setting 

1.      Start the DVR or stop recording, press the Menu key to enter the menu setting interface;

2.      press Up key or Down key to choose the specific parameter, at last,press  the Confirm key to confirm the operation.

3.      Press the Menu key to exit the setting interface after finishing all functions setting.

l  USB mode

Please connect the DVR to computer by USB cable, then press the Power key,the USB menu will popup automatically in the device, and there are two modes optional:

 1：USB-Disk

Under this mode, we can save or get the video files or photos.

 2：PC-Camera

Under this mode, it will popup USB videodevice automatically,and we can take photos or video chat.

l  AVOUT output

    Connect the DVR to TV by AV cable, the screen of DVR will be off and the image will be displayed in the TV.

l  HDMI output

    Connect the DVR to TV by HDMI cable,the screen of DVR will be off and the image will be displayed in the TV.

l  Attention:

1.    Please insert the TF card to the device before recording  

2.    Please connect the DVR to car power by USB car charger, the car charger is built in 12V to 5V adapter, if the output voltage is higher than 5V,the DVR wil be burned down.

Technical Parameter